On 02.06.22 23:58, Pali Rohár wrote:
On Monday 23 May 2022 11:20:27 Pali Rohár wrote:
On Monday 23 May 2022 11:18:23 Robert Marko wrote:
On Mon, May 23, 2022 at 10:20 AM Pali Rohár <p...@kernel.org> wrote:
On Friday 20 May 2022 13:46:32 Robert Marko wrote:
Changes in v4:
* Remove CMD_PCI as PCI is disabled anyway
Changes in v3:
* Use DTS-es pending merge upstream
* Re-enable SCSI as the Armada 37xx BOOT_TARGET_DEVICES defines SCSI device
as one of the bootable ones.
We dont have space constraints, so just re-enable SCSI rather than making
one more config header
Hello! Is this SCSI error related to distroboot as for NVMe here?
https://patchwork.ozlabs.org/comment/2896154/
Hi Pali, its the same type of error, just for SCSI.
I see that you posted a possible solution for cases where boards dont have
one of the listed media enabled.
Ok! I added guard in new patch for all boot targets, including SCSI, so
it should fix also issue for *DPU boards.
Hello! Patch "Set BOOT_TARGET_DEVICES list to enabled peripherals" is
now in u-boot-marvell tree, so you could send a patch which disables
those unused peripherals in eDPU defconfig file.
https://source.denx.de/u-boot/custodians/u-boot-marvell/-/commits/master/
Just to clarify: I originally wanted to push those changes in "master"
upstream beginning of this week. But decided to defer this until the
next merge window open, as most of them are not bug fixes.
Still Pali's comment is correct. You could already work on a patch using
these groundwork patches as basis.
Thanks,
Stefan
Regards,
Robert
Changes in v2:
* Correct the PHY mode to 2500Base-X
* Add the DTB to Makefile
* Remove SCSI/SATA, PCI and E1000 from defconfig as they are not present
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.ma...@sartura.hr
Web: www.sartura.hr
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
