On 2021-11-13, Tom Rini wrote:
On Sat, Nov 13, 2021 at 10:41:02AM +0000, Peter Robinson wrote:
On Fri, Nov 12, 2021 at 9:43 PM Alper Nebi Yasak
<alpernebiya...@gmail.com> wrote:
>
> On 12/11/2021 19:39, Tom Rini wrote:
> > On Fri, Nov 12, 2021 at 11:35:15AM +0300, Aleksei wrote:
> >
> >> Hi U-boot developers,
> >> I'm booting RockPro64 by writing compiled u-boot-rockchip.bin to SD card
offset
> >> 64 as described in doc/board/rockchip/rockchip.rst. There is a USB flash
drive
> >> plugged into USB2 port containing ext4 filesystem with
extlinux/exlinux.conf
> >> and a kernel+initrd images. This setup boots fine on 02ce99ec91 but not on
the
> >> next 3ae64582fb. It gets stuck on "Booting using the fdt blob at
0x1f000000".
> >>
> >> Let me know if I can help debug this. I have a "daily driver" RockPro64
v2.1,
> >> can pull from git repos/branches or apply patches to source tree -
whichever
> >> you prefer.
> >
> > So the commit in question is enabling USB3.0 support on the board.
> > Jagan, Kevar?
>
> This is probably the same inno-usb2 hang [1] that happens on other
> RK3399 boards.
Yes, that will be it.
I guess my hope at this point is that someone will pick up and do the
requested changes, so we can get this long standing issue addressed.
--
Tom
U-Boot 2022.04 works fine (from SD card, RK3399 TPL method from
doc/README.rockchip).
