[PATCH V2 17/17] imx: phycore_imx8mm/p: clean up board watchdog code

[Peng Fan (OSS)]

From: Peng Fan <peng....@nxp.com>

pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng....@nxp.com>
Tested-by: Teresa Remmet <t.rem...@phytec.de>
---
 board/phytec/phycore_imx8mm/spl.c | 19 -------------------
 board/phytec/phycore_imx8mp/spl.c | 19 -------------------
 2 files changed, 38 deletions(-)

diff --git a/board/phytec/phycore_imx8mm/spl.c 
b/board/phytec/phycore_imx8mm/spl.c
index 7f24a3affc8..d87ab6d4497 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -57,23 +57,6 @@ int board_fit_config_name_match(const char *name)
        return 0;
 }
 
-#define WDOG_PAD_CTRL  (PAD_CTL_DSE6 | PAD_CTL_ODE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-       IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-       struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-       imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-       set_wdog_reset(wdog);
-
-       return 0;
-}
-
 void board_init_f(ulong dummy)
 {
        int ret;
@@ -82,8 +65,6 @@ void board_init_f(ulong dummy)
 
        init_uart_clk(2);
 
-       board_early_init_f();
-
        /* Clear the BSS. */
        memset(__bss_start, 0, __bss_end - __bss_start);
 
diff --git a/board/phytec/phycore_imx8mp/spl.c 
b/board/phytec/phycore_imx8mp/spl.c
index 38a581bef57..faed6fc3b76 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -89,23 +89,6 @@ int board_fit_config_name_match(const char *name)
        return 0;
 }
 
-#define WDOG_PAD_CTRL   (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-       MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-       struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-       imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-       set_wdog_reset(wdog);
-
-       return 0;
-}
-
 void board_init_f(ulong dummy)
 {
        int ret;
@@ -114,8 +97,6 @@ void board_init_f(ulong dummy)
 
        init_uart_clk(0);
 
-       board_early_init_f();
-
        ret = spl_early_init();
        if (ret) {
                debug("spl_early_init() failed: %d\n", ret);
-- 
2.36.0