This define is only currently used in a single board, and always set to
one. Define this within the board code and remove other references.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
README | 4 ----
board/astro/mcf5373l/fpga.c | 9 +++++----
include/configs/astro_mcf5373l.h | 1 -
include/configs/mx53cx9020.h | 2 --
include/configs/socfpga_common.h | 7 -------
5 files changed, 5 insertions(+), 18 deletions(-)
diff --git a/README b/README
index 7649dae36338..6a4db9dc5617 100644
--- a/README
+++ b/README
@@ -1350,10 +1350,6 @@ The following options need to be configured:
Enables support for FPGA family.
(SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
- CONFIG_FPGA_COUNT
-
- Specify the number of FPGA devices to support.
-
CONFIG_SYS_FPGA_PROG_FEEDBACK
Enable printing of hash marks during FPGA configuration.
diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c
index ef82f0660703..50a3830b8573 100644
--- a/board/astro/mcf5373l/fpga.c
+++ b/board/astro/mcf5373l/fpga.c
@@ -168,7 +168,8 @@ Altera_CYC2_Passive_Serial_fns altera_fns = {
altera_post_fn
};
-Altera_desc altera_fpga[CONFIG_FPGA_COUNT] = {
+#define FPGA_COUNT 1
+Altera_desc altera_fpga[FPGA_COUNT] = {
{Altera_CYC2,
passive_serial,
85903,
@@ -182,7 +183,7 @@ int astro5373l_altera_load(void)
{
int i;
- for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ for (i = 0; i < FPGA_COUNT; i++) {
/*
* I did not yet manage to get relocation work properly,
* so set stuff here instead of static initialisation:
@@ -372,7 +373,7 @@ xilinx_spartan3_slave_serial_fns xilinx_fns = {
xilinx_fastwr_config_fn
};
-xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = {
+xilinx_desc xilinx_fpga[FPGA_COUNT] = {
{xilinx_spartan3,
slave_serial,
XILINX_XC3S4000_SIZE,
@@ -388,7 +389,7 @@ int astro5373l_xilinx_load(void)
fpga_init();
- for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ for (i = 0; i < FPGA_COUNT; i++) {
/*
* I did not yet manage to get relocation work properly,
* so set stuff here instead of static initialisation:
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 9bf6968e8ad9..18e06076a4ab 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -133,7 +133,6 @@
* it needs non-blocking CFI routines.
*/
-#define CONFIG_FPGA_COUNT 1
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_SYS_FPGA_WAIT 1000
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 1e5df3f7d7ad..f1d751f15a24 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -16,8 +16,6 @@
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_FPGA_COUNT 1
-
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 2
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 6453ab79527d..10ba2d22ffa7 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -58,13 +58,6 @@
#define CONFIG_DW_ALTDESCRIPTOR
#endif
-/*
- * FPGA Driver
- */
-#ifdef CONFIG_CMD_FPGA
-#define CONFIG_FPGA_COUNT 1
-#endif
-
/*
* L4 OSC1 Timer 0
*/
--
2.25.1
