Hi Fabio,
Am Sa., 11. Juni 2022 um 13:10 Uhr schrieb Fabio Estevam <feste...@gmail.com>: > > Hi Heiko, > > On Sat, Jun 11, 2022 at 3:12 AM Heiko Thiery <heiko.thi...@gmail.com> wrote: > > > It took me some effort to get the current u-boot running on my imx8mq. > > But finally it works and I do not see this garbage on the imx8mq. Next > > week I will check on the kontron_sl_imx8mm. This is the output on the kontron bl-imx8m board: U-Boot SPL 2022.07-rc4-00007-g8c3f838be2 (Jun 13 2022 - 15:36:08 +0200) Kontron SL i.MX8MM (N801X) module, 1 GB RAM detected Touch controller detected, assuming LVDS panel... Normal Boot WDT: Not starting watchdog@30280000 Trying to boot from MMC2 NOTICE: BL31: v2.4(release):v2.4 NOTICE: BL31: Built : 15:09:24, Sep 10 2021 U-Boot 2022.07-rc4-00007-g8c3f838be2 (Jun 13 2022 - 15:36:08 +0200) CPU: Freescale i.MX8MMQ rev1.0 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 46C Reset cause: POR Model: Kontron i.MX8MM N801X S LVDS DRAM: 1 GiB Core: 178 devices, 25 uclasses, devicetree: separate WDT: Not starting watchdog@30280000 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPIFlash... SF: Detected mx25r1635f with page size 256 Bytes, erase size 64 KiB, total 2 MiB OK In: serial Out: serial Err: serial Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 => Here I cannot see the extra serial-in garbage ;-/ > > Thanks, appreciated it! -- Heiko