On Thu, Jun 09, 2022 at 06:00:10PM +0530, Sughosh Ganu wrote: > Add a python test script for testing the FWU Multi Bank Update > functionality on the sandbox platform. The script has test cases for > updation of the u-boot binary and the u-boot environment image to the > non active bank.
IIUC, your test doesn't not exercise neither accept-capsule nor revert capsule. I think those tests are crucial for verifying the code. -Takahiro Akashi > The FWU metadata is being stored on the SPI NOR flash, along with the > updatable images, and the FWU metadata driver for MTD devices is being > used for accessing the metadata. Certain FWU boottime checks are > bypassed due to the unavailability of the EFI variable access very > early in the boot on the sandbox platform -- the variable access is > only available once the block disk image has been bound through the > host interface. > > The FWU Multi Bank feature being enabled on the sandbox64 platform is > enabling the RAW Firmware Management Protocol(FMP) instance, therefore > the FIT FMP instance is being removed -- the FIT FMP is already being > tested on the sandbox flattree variant. > > Signed-off-by: Sughosh Ganu <sughosh.g...@linaro.org> > --- > arch/sandbox/Kconfig | 6 + > arch/sandbox/dts/test.dts | 45 ++- > board/sandbox/sandbox.c | 49 +++ > configs/sandbox64_defconfig | 12 +- > include/fwu.h | 2 + > lib/fwu_updates/Kconfig | 2 +- > lib/fwu_updates/fwu.c | 18 +- > lib/fwu_updates/fwu_mtd.c | 10 +- > .../test_capsule_firmware_fit.py | 1 - > .../py/tests/test_fwu_updates/capsule_defs.py | 10 + > test/py/tests/test_fwu_updates/conftest.py | 78 ++++ > .../test_fwu_updates/test_fwu_updates.py | 367 ++++++++++++++++++ > 12 files changed, 587 insertions(+), 13 deletions(-) > create mode 100644 test/py/tests/test_fwu_updates/capsule_defs.py > create mode 100644 test/py/tests/test_fwu_updates/conftest.py > create mode 100644 test/py/tests/test_fwu_updates/test_fwu_updates.py > > diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig > index 5f55c7f28e..2985572083 100644 > --- a/arch/sandbox/Kconfig > +++ b/arch/sandbox/Kconfig > @@ -84,3 +84,9 @@ config SYS_FDT_LOAD_ADDR > See `doc/arch/sandbox.rst` for more information. > > endmenu > + > +config FWU_NUM_BANKS > + default 2 > + > +config FWU_NUM_IMAGES_PER_BANK > + default 2 > diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts > index 8f93775ff4..f11fa8733f 100644 > --- a/arch/sandbox/dts/test.dts > +++ b/arch/sandbox/dts/test.dts > @@ -1145,11 +1145,48 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinmux_spi0_pins>; > > - spi.bin@0 { > + spi0: spi.bin@0 { > reg = <0>; > compatible = "spansion,m25p16", "jedec,spi-nor"; > spi-max-frequency = <40000000>; > sandbox,filename = "spi.bin"; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + uuid = "af9e8c96-bec5-48be-9dab-3491c04b1366"; > + > + partition@0 { > + label = "Metadata"; > + reg = <0x0 0x20000>; > + }; > + > + /* FWU Multi bank update partitions */ > + partition@100000 { > + label = "U-Boot-Bank0"; > + reg = <0x100000 0x10000>; > + uuid = > "a8f61787-5d68-4c9d-9e4a-37bb0df99da7"; > + }; > + > + partition@120000 { > + label = "U-Boot-ENV-Bank0"; > + reg = <0x120000 0x10000>; > + uuid = > "ea9d59af-e0e8-4ef5-9b16-4c80ff67524c"; > + }; > + > + partition@140000 { > + label = "U-Boot-Bank1"; > + reg = <0x140000 0x10000>; > + uuid = > "52377abf-c4e4-4d0b-aafd-ba081a500847"; > + }; > + > + partition@160000 { > + label = "U-Boot-ENV-Bank1"; > + reg = <0x160000 0x10000>; > + uuid = > "4e01d1fa-eebb-437e-9cfe-e7dfbcd04bb3"; > + }; > + }; > }; > spi.bin@1 { > reg = <1>; > @@ -1633,6 +1670,12 @@ > compatible = "sandbox,regmap_test"; > }; > }; > + > + fwu-mdata { > + compatible = "u-boot,fwu-mdata-mtd"; > + fwu-mdata-store = <&spi0>; > + mdata-offsets = <0x0 0x10000>; > + }; > }; > > #include "sandbox_pmic.dtsi" > diff --git a/board/sandbox/sandbox.c b/board/sandbox/sandbox.c > index e054f300c4..222c36d301 100644 > --- a/board/sandbox/sandbox.c > +++ b/board/sandbox/sandbox.c > @@ -6,13 +6,18 @@ > #include <common.h> > #include <cpu_func.h> > #include <cros_ec.h> > +#include <dfu.h> > #include <dm.h> > #include <efi.h> > #include <efi_loader.h> > #include <env_internal.h> > +#include <fwu.h> > +#include <fwu_mdata.h> > #include <init.h> > #include <led.h> > +#include <mtd.h> > #include <os.h> > +#include <uuid.h> > #include <asm/global_data.h> > #include <asm/test.h> > #include <asm/u-boot-sandbox.h> > @@ -51,8 +56,15 @@ struct efi_fw_image fw_images[] = { > }; > > struct efi_capsule_update_info update_info = { > +#if defined(CONFIG_FWU_MULTI_BANK_UPDATE) > + .dfu_string = "mtd nor0=u-boot-bin-a raw 0x100000 0x10000;" > + "u-boot-env-a raw 0x120000 0x10000;" > + "u-boot-bin-b raw 0x140000 0x10000;" > + "u-boot-env-b raw 0x160000 0x10000", > +#else > .dfu_string = "sf 0:0=u-boot-bin raw 0x100000 0x50000;" > "u-boot-env raw 0x150000 0x200000", > +#endif > .images = fw_images, > }; > > @@ -155,3 +167,40 @@ int board_late_init(void) > return 0; > } > #endif > + > +#if defined(CONFIG_FWU_MULTI_BANK_UPDATE) > +int fwu_plat_get_alt_num(struct udevice __always_unused *dev, > + efi_guid_t *image_id, int *alt_num) > +{ > + return fwu_get_mtd_alt_num(image_id, alt_num, "nor0", 1); > +} > + > +int fwu_plat_get_update_index(u32 *update_idx) > +{ > + int ret; > + u32 active_idx; > + > + ret = fwu_get_active_index(&active_idx); > + > + if (ret < 0) > + return -1; > + > + *update_idx = active_idx ^= 0x1; > + > + return ret; > +} > + > +void fwu_plat_get_bootidx(void *boot_idx) > +{ > + int ret; > + u32 active_idx; > + u32 *bootidx = boot_idx; > + > + ret = fwu_get_active_index(&active_idx); > + > + if (ret < 0) > + *bootidx = -1; > + > + *bootidx = active_idx; > +} > +#endif /* CONFIG_FWU_MULTI_BANK_UPDATE */ > diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig > index d7f22b39ae..7a813b46a5 100644 > --- a/configs/sandbox64_defconfig > +++ b/configs/sandbox64_defconfig > @@ -244,9 +244,19 @@ CONFIG_LZ4=y > CONFIG_ERRNO_STR=y > CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y > CONFIG_EFI_CAPSULE_ON_DISK=y > -CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y > CONFIG_EFI_SECURE_BOOT=y > CONFIG_TEST_FDTDEC=y > CONFIG_UNIT_TEST=y > CONFIG_UT_TIME=y > CONFIG_UT_DM=y > +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y > +CONFIG_DM_FWU_MDATA=y > +CONFIG_FWU_MULTI_BANK_UPDATE=y > +CONFIG_FWU_MDATA_MTD=y > +CONFIG_CMD_FWU_METADATA=y > +CONFIG_TOOLS_MKFWUMDATA=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_CMD_MTD=y > +CONFIG_DFU_MTD=y > +CONFIG_DM_MTD=y > +CONFIG_SPI_FLASH_MTD=y > diff --git a/include/fwu.h b/include/fwu.h > index fadbfedd07..9e550182eb 100644 > --- a/include/fwu.h > +++ b/include/fwu.h > @@ -8,6 +8,8 @@ > > #include <blk.h> > #include <efi.h> > +#include <fwu_mdata.h> > +#include <mtd.h> > > #include <linux/types.h> > > diff --git a/lib/fwu_updates/Kconfig b/lib/fwu_updates/Kconfig > index 6de28e0c9c..43bed7729c 100644 > --- a/lib/fwu_updates/Kconfig > +++ b/lib/fwu_updates/Kconfig > @@ -2,7 +2,7 @@ config FWU_MULTI_BANK_UPDATE > bool "Enable FWU Multi Bank Update Feature" > depends on EFI_HAVE_CAPSULE_SUPPORT > select PARTITION_TYPE_GUID > - select EFI_SETUP_EARLY > + select EFI_SETUP_EARLY if !SANDBOX > help > Feature for updating firmware images on platforms having > multiple banks(copies) of the firmware images. One of the > diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c > index 422ef58661..f2c10d836b 100644 > --- a/lib/fwu_updates/fwu.c > +++ b/lib/fwu_updates/fwu.c > @@ -185,12 +185,22 @@ int fwu_boottime_checks(void) > return 0; > } > > - if (efi_init_obj_list() != EFI_SUCCESS) > - return 0; > + /* > + * On the sandbox platform, the EFI variable > + * access is available only after binding the > + * disk image with the host interface. Skip > + * the Trial State check on sandbox. > + */ > + if (!IS_ENABLED(CONFIG_SANDBOX)) { > + if (efi_init_obj_list() != EFI_SUCCESS) > + return 0; > > - ret = fwu_trial_state_check(); > - if (!ret) > + ret = fwu_trial_state_check(); > + if (!ret) > + boottime_check = 1; > + } else { > boottime_check = 1; > + } > > return 0; > } > diff --git a/lib/fwu_updates/fwu_mtd.c b/lib/fwu_updates/fwu_mtd.c > index 3137f8635c..3a9ad70203 100644 > --- a/lib/fwu_updates/fwu_mtd.c > +++ b/lib/fwu_updates/fwu_mtd.c > @@ -84,11 +84,11 @@ int fwu_get_mtd_alt_num(efi_guid_t *image_id, int > *alt_num, > int gen_image_alt_info(char *buf, size_t len, int sidx, > struct fwu_image_entry *img, struct mtd_info *mtd) > { > - char *p = buf, *end = buf + len; > - char uuidbuf[UUID_STR_LEN + 1]; > - ofnode node, parts_node; > - const char *suuid; > int i; > + const char *suuid; > + ofnode node, parts_node; > + char uuidbuf[UUID_STR_LEN + 1]; > + char *p = buf, *end = buf + len; > > /* Find partition node under given MTD device. */ > parts_node = ofnode_by_compatible(mtd_get_ofnode(mtd), > @@ -145,7 +145,7 @@ int gen_image_alt_info(char *buf, size_t len, int sidx, > > int fwu_gen_alt_info_from_mtd(char *buf, size_t len, struct mtd_info *mtd) > { > - struct fwu_mdata *mdata; > + struct fwu_mdata *mdata = NULL; > int i, l, ret; > > ret = fwu_get_mdata(&mdata); > diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware_fit.py > b/test/py/tests/test_efi_capsule/test_capsule_firmware_fit.py > index 5bef84958b..93bc5ed44b 100644 > --- a/test/py/tests/test_efi_capsule/test_capsule_firmware_fit.py > +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware_fit.py > @@ -13,7 +13,6 @@ import pytest > from capsule_defs import * > > > -@pytest.mark.boardspec('sandbox64') > @pytest.mark.boardspec('sandbox_flattree') > @pytest.mark.buildconfigspec('efi_capsule_firmware_fit') > @pytest.mark.buildconfigspec('efi_capsule_on_disk') > diff --git a/test/py/tests/test_fwu_updates/capsule_defs.py > b/test/py/tests/test_fwu_updates/capsule_defs.py > new file mode 100644 > index 0000000000..59b40f11bd > --- /dev/null > +++ b/test/py/tests/test_fwu_updates/capsule_defs.py > @@ -0,0 +1,10 @@ > +# SPDX-License-Identifier: GPL-2.0+ > + > +# Directories > +CAPSULE_DATA_DIR = '/EFI/CapsuleTestData' > +CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule' > + > +# v1.5.1 or earlier of efitools has a bug in sha256 calculation, and > +# you need build a newer version on your own. > +# The path must terminate with '/' if it is not null. > +EFITOOLS_PATH = '' > diff --git a/test/py/tests/test_fwu_updates/conftest.py > b/test/py/tests/test_fwu_updates/conftest.py > new file mode 100644 > index 0000000000..cdf824c3be > --- /dev/null > +++ b/test/py/tests/test_fwu_updates/conftest.py > @@ -0,0 +1,78 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# Copyright (c) 2020, Linaro Limited > +# Author: AKASHI Takahiro <takahiro.aka...@linaro.org> > + > +import os > +import os.path > +import re > +from subprocess import call, check_call, check_output, CalledProcessError > +import pytest > +from capsule_defs import * > + > +# > +# Fixture for UEFI capsule test > +# > + > +@pytest.fixture(scope='session') > +def efi_capsule_data(request, u_boot_config): > + """Set up a file system to be used in UEFI capsule and > + authentication test. > + > + Args: > + request: Pytest request object. > + u_boot_config: U-boot configuration. > + > + Return: > + A path to disk image to be used for testing > + """ > + global CAPSULE_DATA_DIR, CAPSULE_INSTALL_DIR > + > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > + data_dir = mnt_point + CAPSULE_DATA_DIR > + install_dir = mnt_point + CAPSULE_INSTALL_DIR > + image_path = u_boot_config.persistent_data_dir + '/test_efi_capsule.img' > + > + try: > + # Create a target device > + check_call('dd if=/dev/zero of=./spi.bin bs=1MiB count=16', > shell=True) > + > + check_call('rm -rf %s' % mnt_point, shell=True) > + check_call('mkdir -p %s' % data_dir, shell=True) > + check_call('mkdir -p %s' % install_dir, shell=True) > + > + # Create capsule files > + # two regions: one for u-boot.bin and the other for u-boot.env > + check_call('cd %s; echo -n u-boot-a:Old > u-boot-a.bin.old; echo -n > u-boot-env-a:Old > u-boot-env-a.old; echo -n u-boot-a:New > u-boot-a.bin.new; > echo -n u-boot-env-a:New > u-boot-env-a.new; echo -n u-boot-b:Old > > u-boot-b.bin.old; echo -n u-boot-env-b:Old > u-boot-env-b.old; echo -n > u-boot-b:New > u-boot-b.bin.new; echo -n u-boot-env-b:New > > u-boot-env-b.new;' % data_dir, > + shell=True) > + check_call('cd %s; %s/tools/mkfwumdata -i 2 -b 2 -a 0 -g > af9e8c96-bec5-48be-9dab-3491c04b1366,09D7CF52-0720-4710-91D1-08469B7FE9C8,a8f61787-5d68-4c9d-9e4a-37bb0df99da7,52377abf-c4e4-4d0b-aafd-ba081a500847 > > af9e8c96-bec5-48be-9dab-3491c04b1366,5A7021F5-FEF2-48B4-AABA-832E777418C0,ea9d59af-e0e8-4ef5-9b16-4c80ff67524c,4e01d1fa-eebb-437e-9cfe-e7dfbcd04bb3 > metadata_bank0.bin' %(data_dir, u_boot_config.build_dir), shell=True) > + check_call('cd %s; %s/tools/mkfwumdata -i 2 -b 2 -a 1 -g > af9e8c96-bec5-48be-9dab-3491c04b1366,09D7CF52-0720-4710-91D1-08469B7FE9C8,a8f61787-5d68-4c9d-9e4a-37bb0df99da7,52377abf-c4e4-4d0b-aafd-ba081a500847 > > af9e8c96-bec5-48be-9dab-3491c04b1366,5A7021F5-FEF2-48B4-AABA-832E777418C0,ea9d59af-e0e8-4ef5-9b16-4c80ff67524c,4e01d1fa-eebb-437e-9cfe-e7dfbcd04bb3 > metadata_bank1.bin' %(data_dir, u_boot_config.build_dir), shell=True) > + > + check_call('cd %s; %s/tools/mkeficapsule --index 1 --guid > 09D7CF52-0720-4710-91D1-08469B7FE9C8 u-boot-b.bin.new Test01' % > + (data_dir, u_boot_config.build_dir), > + shell=True) > + check_call('cd %s; %s/tools/mkeficapsule --index 1 --guid > 5A7021F5-FEF2-48B4-AABA-832E777418C0 u-boot-env-b.new Test02' % > + (data_dir, u_boot_config.build_dir), > + shell=True) > + > + check_call('cd %s; %s/tools/mkeficapsule --index 1 --guid > 09D7CF52-0720-4710-91D1-08469B7FE9C8 u-boot-a.bin.new Test03' % > + (data_dir, u_boot_config.build_dir), > + shell=True) > + check_call('cd %s; %s/tools/mkeficapsule --index 1 --guid > 5A7021F5-FEF2-48B4-AABA-832E777418C0 u-boot-env-a.new Test04' % > + (data_dir, u_boot_config.build_dir), > + shell=True) > + > + # Create a disk image with EFI system partition > + check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s > %s' % > + (mnt_point, image_path), shell=True) > + check_call('sgdisk %s -A 1:set:0 -t > 1:C12A7328-F81F-11D2-BA4B-00A0C93EC93B' % > + image_path, shell=True) > + > + except CalledProcessError as exception: > + pytest.skip('Setup failed: %s' % exception.cmd) > + return > + else: > + yield image_path > + finally: > + call('rm -rf %s' % mnt_point, shell=True) > + call('rm -f %s' % image_path, shell=True) > + call('rm -f ./spi.bin', shell=True) > diff --git a/test/py/tests/test_fwu_updates/test_fwu_updates.py > b/test/py/tests/test_fwu_updates/test_fwu_updates.py > new file mode 100644 > index 0000000000..d9dff3afaf > --- /dev/null > +++ b/test/py/tests/test_fwu_updates/test_fwu_updates.py > @@ -0,0 +1,367 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# Copyright (c) 2022, Linaro Limited > +# > +# FWU Multi Bank Firmware Update Test > + > +""" > +This test verifies FWU Multi Bank firmware update for raw images > +""" > + > +from subprocess import check_call, check_output, CalledProcessError > +import pytest > +from capsule_defs import * > + > + > +@pytest.mark.boardspec('sandbox64') > +@pytest.mark.buildconfigspec('efi_capsule_firmware_raw') > +@pytest.mark.buildconfigspec('efi_capsule_on_disk') > +@pytest.mark.buildconfigspec('dfu') > +@pytest.mark.buildconfigspec('dfu_sf') > +@pytest.mark.buildconfigspec('cmd_efidebug') > +@pytest.mark.buildconfigspec('cmd_fat') > +@pytest.mark.buildconfigspec('cmd_memory') > +@pytest.mark.buildconfigspec('cmd_nvedit_efi') > +@pytest.mark.buildconfigspec('cmd_sf') > +@pytest.mark.buildconfigspec('fwu_multi_bank_update') > +@pytest.mark.buildconfigspec('dm_fwu_mdata') > +@pytest.mark.buildconfigspec('fwu_mdata_mtd') > +@pytest.mark.slow > +class TestEfiCapsuleFirmwareRaw(object): > + def test_fwu_updates_fw1( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 1 - Update U-Boot Bank 1 binary on SPI Flash > + 0x100000-0x150000: U-Boot binary Bank 0 (but dummy) > + 0x150000-0x200000: U-Boot binary Bank 1 (but dummy) > + """ > + > + # other tests might have run and the > + # system might not be in a clean state. > + # Restart before starting the tests. > + u_boot_console.restart_uboot() > + > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 1-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi -s ""', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env save']) > + > + # initialize contents > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot-a.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'fatload host 0:1 4000000 %s/u-boot-b.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 140000 10']) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5100000 140000 10', > + 'md.b 5100000 10' > + ]) > + assert 'u-boot-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/metadata_bank0.bin' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 0 $filesize', > + 'sf write 4000000 10000 $filesize']) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x0' in ''.join(output) > + assert 'previous_active_index: 0x1' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test01' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test01 $filesize' % > CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test01' in ''.join(output) > + > + # reboot > + u_boot_console.restart_uboot() > + > + with u_boot_console.log.section('Test Case 1-b, after reboot'): > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test01' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'efidebug capsule disk-update', wait_for_reboot = True) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x1' in ''.join(output) > + assert 'previous_active_index: 0x0' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 4000000 140000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-b:New' in ''.join(output) > + > + def test_fwu_updates_fw2( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 2 - Update U-Boot and U-Boot Env Bank 1 binary on SPI Flash > + 0x100000-0x110000: U-Boot binary Bank 0 (but dummy) > + 0x120000-0x130000: U-Boot Env binary Bank 0 (but dummy) > + 0x140000-0x150000: U-Boot binary Bank 1 (but dummy) > + 0x160000-0x170000: U-Boot Env binary Bank 1 (but dummy) > + """ > + > + # other tests might have run and the > + # system might not be in a clean state. > + # Restart before starting the tests. > + u_boot_console.restart_uboot() > + > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 2-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi -s ""', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env save']) > + > + # initialize contents > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot-a.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'fatload host 0:1 4000000 %s/u-boot-env-a.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 120000 10', > + 'fatload host 0:1 4000000 %s/u-boot-b.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 140000 10', > + 'fatload host 0:1 4000000 %s/u-boot-env-b.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 160000 10']) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 120000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-env-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5100000 140000 10', > + 'md.b 5100000 10' > + ]) > + assert 'u-boot-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 160000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-env-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/metadata_bank0.bin' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 0 100', > + 'sf write 4000000 10000 100']) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x0' in ''.join(output) > + assert 'previous_active_index: 0x1' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test01' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test01 $filesize' % > CAPSULE_INSTALL_DIR, > + 'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test02 $filesize' % > CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test01' in ''.join(output) > + assert 'Test02' in ''.join(output) > + > + # reboot > + u_boot_console.restart_uboot() > + > + with u_boot_console.log.section('Test Case 2-b, after reboot'): > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test01' in ''.join(output) > + assert 'Test02' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'efidebug capsule disk-update', wait_for_reboot = True) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x1' in ''.join(output) > + assert 'previous_active_index: 0x0' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 120000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-env-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 4000000 140000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-b:New' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 4000000 160000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-env-b:New' in ''.join(output) > + > + def test_fwu_updates_fw3( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 3 - Update U-Boot and U-Boot Env Bank 0 binary on SPI Flash > + 0x100000-0x110000: U-Boot binary Bank 0 (but dummy) > + 0x120000-0x130000: U-Boot Env binary Bank 0 (but dummy) > + 0x140000-0x150000: U-Boot binary Bank 1 (but dummy) > + 0x160000-0x170000: U-Boot Env binary Bank 1 (but dummy) > + """ > + > + # other tests might have run and the > + # system might not be in a clean state. > + # Restart before starting the tests. > + u_boot_console.restart_uboot() > + > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 3-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi -s ""', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env save']) > + > + # initialize contents > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot-a.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'fatload host 0:1 4000000 %s/u-boot-env-a.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 120000 10', > + 'fatload host 0:1 4000000 %s/u-boot-b.bin.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 140000 10', > + 'fatload host 0:1 4000000 %s/u-boot-env-b.old' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 160000 10']) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 120000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-env-a:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5100000 140000 10', > + 'md.b 5100000 10' > + ]) > + assert 'u-boot-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 5000000 160000 10', > + 'md.b 5000000 10' > + ]) > + assert 'u-boot-env-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/metadata_bank1.bin' % > CAPSULE_DATA_DIR, > + 'sf write 4000000 0 100', > + 'sf write 4000000 10000 100']) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x1' in ''.join(output) > + assert 'previous_active_index: 0x0' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test03' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test03 $filesize' % > CAPSULE_INSTALL_DIR, > + 'fatload host 0:1 4000000 %s/Test04' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test04 $filesize' % > CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test03' in ''.join(output) > + assert 'Test04' in ''.join(output) > + > + # reboot > + u_boot_console.restart_uboot() > + > + with u_boot_console.log.section('Test Case 3-b, after reboot'): > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test03' in ''.join(output) > + assert 'Test04' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'efidebug capsule disk-update', wait_for_reboot = True) > + > + output = u_boot_console.run_command( > + 'fwu_mdata_read') > + assert 'active_index: 0x0' in ''.join(output) > + assert 'previous_active_index: 0x1' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-a:New' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 120000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-env-a:New' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 4000000 140000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-b:Old' in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf read 4000000 160000 10', > + 'md.b 4000000 10']) > + assert 'u-boot-env-b:Old' in ''.join(output) > -- > 2.25.1 >