Symbol handling depends on compilation flags. Right now manual relocation
is used that's why symbols can be referenced just by name and there is no
need to find them out. But when position independent code (PIC) is used
symbols need to be described differently. That's why having one macro
change is easier than changing the whole code.
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
(no changes since v1)
arch/microblaze/cpu/start.S | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 9aa5fd099361..72b0f3354731 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -10,6 +10,9 @@
#include <asm-offsets.h>
#include <config.h>
+#define SYM_ADDR(reg, reg_add, symbol) \
+ addi reg, reg_add, symbol
+
.text
.global _start
_start:
@@ -66,8 +69,8 @@ _start:
clear_bss:
/* clear BSS segments */
- addi r5, r0, __bss_start
- addi r4, r0, __bss_end
+ SYM_ADDR(r5, r0, __bss_start)
+ SYM_ADDR(r4, r0, __bss_end)
cmp r6, r5, r4
beqi r6, 3f
2:
@@ -143,7 +146,7 @@ __setup_exceptions:
swi r2, r4, 0x0 /* reset address - imm opcode */
swi r3, r4, 0x4 /* reset address - brai opcode */
- addik r6, r0, _start
+ SYM_ADDR(r6, r0, _start)
/* Intentionally keep reset vector back to origin u-boot location */
sw r6, r1, r0
lhu r7, r1, r10
@@ -157,7 +160,7 @@ __setup_exceptions:
swi r2, r4, 0x8 /* user vector exception - imm opcode */
swi r3, r4, 0xC /* user vector exception - brai opcode */
- addik r6, r5, _exception_handler
+ SYM_ADDR(r6, r5, _exception_handler)
sw r6, r1, r0
/*
* BIG ENDIAN memory map for user exception
@@ -190,7 +193,7 @@ __setup_exceptions:
swi r2, r4, 0x10 /* interrupt - imm opcode */
swi r3, r4, 0x14 /* interrupt - brai opcode */
- addik r6, r5, _interrupt_handler
+ SYM_ADDR(r6, r5, _interrupt_handler)
sw r6, r1, r0
lhu r7, r1, r10
rsubi r8, r10, 0x12
@@ -202,7 +205,7 @@ __setup_exceptions:
swi r2, r4, 0x20 /* hardware exception - imm opcode */
swi r3, r4, 0x24 /* hardware exception - brai opcode */
- addik r6, r5, _hw_exception_handler
+ SYM_ADDR(r6, r5, _hw_exception_handler)
sw r6, r1, r0
lhu r7, r1, r10
rsubi r8, r10, 0x22
@@ -274,8 +277,8 @@ relocate_code:
addi r31, r6, 0 /* Start to use new GD */
/* Relocate text and data - r12 temp value */
- addi r21, r0, _start
- addi r22, r0, _end /* Include BSS too */
+ SYM_ADDR(r21, r0, _start)
+ SYM_ADDR(r22, r0, _end) /* Include BSS too */
addi r22, r22, -4
rsub r6, r21, r22
@@ -319,8 +322,8 @@ relocate_code:
nop
2: addi r5, r31, 0 /* gd is initialized in board_r.c */
- addi r6, r0, _start
- addi r12, r23, board_init_r
+ SYM_ADDR(r6, r0, _start)
+ SYM_ADDR(r12, r23, board_init_r)
bra r12 /* Jump to relocated code */
.end relocate_code
--
2.36.1
