> -----Original Message-----
> From: joel.s...@gmail.com <joel.s...@gmail.com> On Behalf Of Joel Stanley
> Sent: Monday, June 20, 2022 3:25 PM
> To: Ryan Chen <ryan_c...@aspeedtech.com>; BMC-SW
> <bmc...@aspeedtech.com>; Heiko Schocher <h...@denx.de>
> Cc: u-boot@lists.denx.de; Cédric Le Goater <c...@kaod.org>
> Subject: [PATCH 03/10] ARM: dts: ast2600: Dsiable I2C nodes by default
>
> Allow boards to enable the buses they use.
>
> Signed-off-by: Joel Stanley <j...@jms.id.au>
Reviewed-by: Ryan Chen <ryan_c...@aspeedtech.com>
> ---
> arch/arm/dts/ast2600.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index
> 4b23d25ede0a..a37d062bcad7 100644
> --- a/arch/arm/dts/ast2600.dtsi
> +++ b/arch/arm/dts/ast2600.dtsi
> @@ -868,6 +868,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c3_default>;
> + status = "disabled";
> };
>
> i2c3: i2c@200 {
> @@ -883,6 +884,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c4_default>;
> + status = "disabled";
> };
>
> i2c4: i2c@280 {
> @@ -898,6 +900,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c5_default>;
> + status = "disabled";
> };
>
> i2c5: i2c@300 {
> @@ -913,6 +916,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c6_default>;
> + status = "disabled";
> };
>
> i2c6: i2c@380 {
> @@ -928,6 +932,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c7_default>;
> + status = "disabled";
> };
>
> i2c7: i2c@400 {
> @@ -943,6 +948,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c8_default>;
> + status = "disabled";
> };
>
> i2c8: i2c@480 {
> @@ -958,6 +964,7 @@
> clocks = <&scu ASPEED_CLK_APB2>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c9_default>;
> + status = "disabled";
> };
>
> i2c9: i2c@500 {
> --
> 2.35.1