Activate the led managed in stm32mp1 board for U-Boot indication
in STM32MP13F-DK device tree.
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
(no changes since v1)
arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
index dfe5bbb2e34..cbe4eb56083 100644
--- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
@@ -11,8 +11,18 @@
};
config {
+ u-boot,boot-led = "led-blue";
+ u-boot,error-led = "led-red";
u-boot,mmc-env-partition = "u-boot-env";
};
+
+ leds {
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
};
&uart4 {
--
2.25.1
