Hi Patrick On 6/30/22 10:20, Patrick Delaunay wrote: > Activate the led managed in stm32mp1 board for U-Boot indication > in STM32MP13F-DK device tree. > > Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com> > --- > > (no changes since v1) > > arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi > b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi > index dfe5bbb2e34..cbe4eb56083 100644 > --- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi > +++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi > @@ -11,8 +11,18 @@ > }; > > config { > + u-boot,boot-led = "led-blue"; > + u-boot,error-led = "led-red"; > u-boot,mmc-env-partition = "u-boot-env"; > }; > + > + leds { > + led-red { > + color = <LED_COLOR_ID_RED>; > + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; > + default-state = "off"; > + }; > + }; > }; > > &uart4 {
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com> Thanks Patrice