Add definition for FSPI configuration block and subsequently new offsets for
u-boot-spl and u-boot-itb for CONFIG_FSPI_HEADER option.
Signed-off-by: Mamta Shukla <mamta.shu...@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemme...@leica-geosystems.com>
Tested-by: Adam Ford <aford...@gmail.com>
Reviewed-by: Fabio Estevam <feste...@denx.de>
---
v2:
-No changes
v3:
-Fix Checkpatch ERROR: code indent should use tabs where possible
v4:
-No changes
arch/arm/dts/imx8mm-u-boot.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 9f66cdb65a..69363435b4 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -150,6 +150,25 @@
filename = "flash.bin";
pad-byte = <0x00>;
+#ifdef CONFIG_FSPI_CONF_HEADER
+ fspi_conf_block {
+ filename = CONFIG_FSPI_CONF_FILE;
+ type = "blob-ext";
+ size = <0x1000>;
+ };
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x1000>;
+ type = "blob-ext";
+ };
+
+ binman_uboot: uboot {
+ filename = "u-boot.itb";
+ offset = <0x58C00>;
+ type = "blob-ext";
+ };
+#else
spl {
filename = "spl.bin";
offset = <0x0>;
@@ -161,6 +180,7 @@
offset = <0x57c00>;
type = "blob-ext";
};
+#endif
};
};
--
2.25.1
