PING? How many times you would ask me to again rebase this patch??
On Sunday 03 July 2022 14:39:13 Pali Rohár wrote: > On Thursday 23 June 2022 15:04:08 Pali Rohár wrote: > > On Thursday 16 June 2022 14:37:07 Pali Rohár wrote: > > > On some boards upper 4 bits of i2c boot input data (register 0) are > > > inverted. Information which bits are inverted is stored in register 2. > > > > > > So invert read input data back according to register 2 prior processing > > > them. This fixes printing "rom_loc: value" line during booting. > > > > > > Signed-off-by: Pali Rohár <p...@kernel.org> > > > --- > > > Changes in v3: > > > * Rebased on top of the U-Boot next branch, commit > > > a87a6fcd20c0e29fe55bfbb6917c4aa1f1bbce74 > > > > PING? > > PING? > > > > Changes in v2: > > > * Use register 2 for detecting which bits needs to be inverted > > > --- > > > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 6 ++++-- > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c > > > b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c > > > index 6665aa4ba94e..d36306f35427 100644 > > > --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c > > > +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c > > > @@ -174,7 +174,7 @@ int checkboard(void) > > > { > > > struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); > > > ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); > > > - u8 in, out, io_config, val; > > > + u8 in, out, invert, io_config, val; > > > int bus_num = CONFIG_SYS_SPD_BUS_NUM; > > > > > > /* FIXME: This should just use the model from the device tree or > > > similar */ > > > @@ -198,6 +198,7 @@ int checkboard(void) > > > > > > if (dm_i2c_read(dev, 0, &in, 1) < 0 || > > > dm_i2c_read(dev, 1, &out, 1) < 0 || > > > + dm_i2c_read(dev, 2, &invert, 1) < 0 || > > > dm_i2c_read(dev, 3, &io_config, 1) < 0) { > > > printf("Error reading i2c boot information!\n"); > > > return 0; /* Don't want to hang() on this error */ > > > @@ -207,13 +208,14 @@ int checkboard(void) > > > > > > if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 || > > > i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 || > > > + i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 2, 1, &invert, 1) < 0 || > > > i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) { > > > printf("Error reading i2c boot information!\n"); > > > return 0; /* Don't want to hang() on this error */ > > > } > > > #endif > > > > > > - val = (in & io_config) | (out & (~io_config)); > > > + val = ((in ^ invert) & io_config) | (out & (~io_config)); > > > > > > puts("rom_loc: "); > > > if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD) { > > > -- > > > 2.20.1 > > >