Currently there is a mismatch among DT node overrides in starqltechn
board DTS file and the actual DT nodes in the sdm845.dtsi. So fix that
to align with DT nodes in sdm845.dtsi.
Signed-off-by: Sumit Garg <sumit.g...@linaro.org>
Reviewed-by: Ramon Fried <rfried....@gmail.com>
---
arch/arm/dts/starqltechn-uboot.dtsi | 18 ++++++++----------
arch/arm/dts/starqltechn.dts | 2 +-
2 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/starqltechn-uboot.dtsi
b/arch/arm/dts/starqltechn-uboot.dtsi
index b55cccfe14..8d5d09c3a5 100644
--- a/arch/arm/dts/starqltechn-uboot.dtsi
+++ b/arch/arm/dts/starqltechn-uboot.dtsi
@@ -16,16 +16,14 @@
serial@a84000 {
u-boot,dm-pre-reloc;
};
- gcc {
- clock-controller@100000 {
- u-boot,dm-pre-reloc;
- };
- gpio_north@3900000 {
- u-boot,dm-pre-reloc;
- };
- pinctrl@3900000 {
- u-boot,dm-pre-reloc;
- };
+ clock-controller@100000 {
+ u-boot,dm-pre-reloc;
+ };
+ gpio_north@3900000 {
+ u-boot,dm-pre-reloc;
+ };
+ pinctrl_north@3900000 {
+ u-boot,dm-pre-reloc;
};
};
};
diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts
index 0261388319..34a4f59cbd 100644
--- a/arch/arm/dts/starqltechn.dts
+++ b/arch/arm/dts/starqltechn.dts
@@ -48,7 +48,7 @@
status = "okay";
};
- pinctrl@3900000 {
+ pinctrl_north@3900000 {
muic_i2c: muic_i2c {
pins = "GPIO_33", "GPIO_34";
drive-strength = <0x2>;
--
2.25.1
