El Fri, Jul 15, 2022 at 05:14:26PM +0200, Quentin Schulz deia:
> From: Quentin Schulz <quentin.sch...@theobroma-systems.com>
> 
> An earlier commit makes the common SPL code call
> regulators_enable_boot_on and regulators_enable_boot_off before
> iterating over possible boot media for U-Boot proper. There is therefore
> no need to do this in the rk3399-specific code, so let's remove it.
> 
> Cc: Quentin Schulz <foss+ub...@0leil.net>
> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
> ---
>

Tested on a Rock-Pi-4B and didn't see any regression.
Tested-by: Xavier Drudis Ferran <xdru...@tinet.cat>


 
> - This patch depends on
>   https://lore.kernel.org/u-boot/20220715150949.952853-1-foss+ub...@0leil.net/
>   and
>   https://lore.kernel.org/u-boot/20220715150949.952853-2-foss+ub...@0leil.net/
> 
>  arch/arm/mach-rockchip/rk3399/rk3399.c | 10 ----------
>  1 file changed, 10 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c 
> b/arch/arm/mach-rockchip/rk3399/rk3399.c
> index db8a6cb83a..691d69dc59 100644
> --- a/arch/arm/mach-rockchip/rk3399/rk3399.c
> +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
> @@ -277,15 +277,5 @@ void spl_board_init(void)
>               if (cru->glb_rst_st != 0)
>                       rk3399_force_power_on_reset();
>       }
> -
> -     if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
> -             /*
> -              * Turning the eMMC and SPI back on (if disabled via the Qseven
> -              * BIOS_ENABLE) signal is done through a always-on regulator).
> -              */
> -             if (regulators_enable_boot_on(false))
> -                     debug("%s: Cannot enable boot on regulator\n",
> -                           __func__);
> -     }
>  }
>  #endif
> -- 
> 2.36.1
> 

Reply via email to