From: Peng Fan <peng....@nxp.com>
Add bootaux command to support on-demand booting M33 from u-boot.
It kicks M33 via ATF by "bootaux 0x201e0000 0"
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/mach-imx/imx9/Makefile | 4 +
arch/arm/mach-imx/imx9/imx_bootaux.c | 133 +++++++++++++++++++++++++++
arch/arm/mach-imx/imx9/soc.c | 10 +-
include/imx_sip.h | 1 +
4 files changed, 147 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/imx9/imx_bootaux.c
diff --git a/arch/arm/mach-imx/imx9/Makefile b/arch/arm/mach-imx/imx9/Makefile
index 41a22500c95..6d038a60c67 100644
--- a/arch/arm/mach-imx/imx9/Makefile
+++ b/arch/arm/mach-imx/imx9/Makefile
@@ -5,3 +5,7 @@
obj-y += lowlevel_init.o
obj-y += soc.o clock.o clock_root.o trdc.o
obj-$(CONFIG_AHAB_BOOT) += ahab.o
+
+#ifndef CONFIG_SPL_BUILD
+obj-y += imx_bootaux.o
+#endif
diff --git a/arch/arm/mach-imx/imx9/imx_bootaux.c
b/arch/arm/mach-imx/imx9/imx_bootaux.c
new file mode 100644
index 00000000000..3b6662aeb81
--- /dev/null
+++ b/arch/arm/mach-imx/imx9/imx_bootaux.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <common.h>
+#include <command.h>
+#include <log.h>
+#include <imx_sip.h>
+#include <linux/arm-smccc.h>
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0,
+ 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+int arch_auxiliary_core_down(u32 core_id)
+{
+ struct arm_smccc_res res;
+
+ printf("## Stopping auxiliary core\n");
+
+ arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_STOP, 0, 0,
+ 0, 0, 0, 0, &res);
+
+ return 0;
+}
+
+int arch_auxiliary_core_up(u32 core_id, ulong addr)
+{
+ struct arm_smccc_res res;
+ u32 stack, pc;
+
+ if (!addr)
+ return -EINVAL;
+
+ stack = *(u32 *)addr;
+ pc = *(u32 *)(addr + 4);
+
+ printf("## Starting auxiliary core stack = 0x%08X, pc = 0x%08X...\n",
stack, pc);
+
+ arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0,
+ 0, 0, 0, 0, &res);
+
+ return 0;
+}
+
+/*
+ * To i.MX6SX and i.MX7D, the image supported by bootaux needs
+ * the reset vector at the head for the image, with SP and PC
+ * as the first two words.
+ *
+ * Per the cortex-M reference manual, the reset vector of M4/M7 needs
+ * to exist at 0x0 (TCMUL/IDTCM). The PC and SP are the first two addresses
+ * of that vector. So to boot M4/M7, the A core must build the M4/M7's reset
+ * vector with getting the PC and SP from image and filling them to
+ * TCMUL/IDTCM. When M4/M7 is kicked, it will load the PC and SP by itself.
+ * The TCMUL/IDTCM is mapped to (MCU_BOOTROM_BASE_ADDR) at A core side for
+ * accessing the M4/M7 TCMUL/IDTCM.
+ */
+static int do_bootaux(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ ulong addr;
+ int ret, up;
+ u32 core = 0;
+ u32 stop = 0;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (argc > 2)
+ core = simple_strtoul(argv[2], NULL, 10);
+
+ if (argc > 3)
+ stop = simple_strtoul(argv[3], NULL, 10);
+
+ up = arch_auxiliary_core_check_up(core);
+ if (up) {
+ printf("## Auxiliary core is already up\n");
+ return CMD_RET_SUCCESS;
+ }
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ if (!addr)
+ return CMD_RET_FAILURE;
+
+ ret = arch_auxiliary_core_up(core, addr);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_stopaux(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ int ret, up;
+
+ up = arch_auxiliary_core_check_up(0);
+ if (!up) {
+ printf("## Auxiliary core is already down\n");
+ return CMD_RET_SUCCESS;
+ }
+
+ ret = arch_auxiliary_core_down(0);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+ stopaux, CONFIG_SYS_MAXARGS, 1, do_stopaux,
+ "Stop auxiliary core",
+ "<address> [<core>]\n"
+ " - start auxiliary core [<core>] (default 0),\n"
+ " at address <address>\n"
+);
+
+U_BOOT_CMD(
+ bootaux, CONFIG_SYS_MAXARGS, 1, do_bootaux,
+ "Start auxiliary core",
+ "<address> [<core>]\n"
+ " - start auxiliary core [<core>] (default 0),\n"
+ " at address <address>\n"
+);
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
index 2a29454d1eb..ca88271564c 100644
--- a/arch/arm/mach-imx/imx9/soc.c
+++ b/arch/arm/mach-imx/imx9/soc.c
@@ -131,6 +131,14 @@ static struct mm_region imx93_mem_map[] = {
.size = 0x100000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
+ }, {
+ /* TCM */
+ .virt = 0x201c0000UL,
+ .phys = 0x201c0000UL,
+ .size = 0x80000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* OCRAM */
.virt = 0x20480000UL,
@@ -380,7 +388,7 @@ void soc_power_init(void)
disable_isolation();
}
-static bool m33_is_rom_kicked(void)
+bool m33_is_rom_kicked(void)
{
struct blk_ctrl_s_aonmix_regs *s_regs =
(struct blk_ctrl_s_aonmix_regs
*)BLK_CTRL_S_ANOMIX_BASE_ADDR;
diff --git a/include/imx_sip.h b/include/imx_sip.h
index 26dbe0421a0..1b873f231be 100644
--- a/include/imx_sip.h
+++ b/include/imx_sip.h
@@ -15,5 +15,6 @@
#define IMX_SIP_SRC 0xC2000005
#define IMX_SIP_SRC_M4_START 0x00
#define IMX_SIP_SRC_M4_STARTED 0x01
+#define IMX_SIP_SRC_M4_STOP 0x02
#endif
--
2.36.0
