[PATCH 2/2] xilinx: common: Use strlcpy instead of strncpy

[Michal Simek]

It is recommendation done by checkpatch to all the time have \0 terminated
strings.

Signed-off-by: Michal Simek <michal.si...@amd.com>
---

 board/xilinx/common/board.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index b0c11aaa4256..9b4aded466ab 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -238,23 +238,23 @@ static int xilinx_read_eeprom_fru(struct udevice *dev, 
char *name,
        }
 
        /* It is clear that FRU was captured and structures were filled */
-       strncpy(desc->manufacturer, (char *)fru_data.brd.manufacturer_name,
+       strlcpy(desc->manufacturer, (char *)fru_data.brd.manufacturer_name,
                sizeof(desc->manufacturer));
-       strncpy(desc->uuid, (char *)fru_data.brd.uuid,
+       strlcpy(desc->uuid, (char *)fru_data.brd.uuid,
                sizeof(desc->uuid));
-       strncpy(desc->name, (char *)fru_data.brd.product_name,
+       strlcpy(desc->name, (char *)fru_data.brd.product_name,
                sizeof(desc->name));
        for (i = 0; i < sizeof(desc->name); i++) {
                if (desc->name[i] == ' ')
                        desc->name[i] = '\0';
        }
-       strncpy(desc->revision, (char *)fru_data.brd.rev,
+       strlcpy(desc->revision, (char *)fru_data.brd.rev,
                sizeof(desc->revision));
        for (i = 0; i < sizeof(desc->revision); i++) {
                if (desc->revision[i] == ' ')
                        desc->revision[i] = '\0';
        }
-       strncpy(desc->serial, (char *)fru_data.brd.serial_number,
+       strlcpy(desc->serial, (char *)fru_data.brd.serial_number,
                sizeof(desc->serial));
 
        while (id < EEPROM_HDR_NO_OF_MAC_ADDR) {
-- 
2.36.1