From: Michael Trimarchi <mich...@amarulasolutions.com>

Upstream linux commit c51d0ac59f2420.

Move Samsung specific initialization and detection logic into
nand_samsung.c. This is part of the "separate vendor specific code from
core" cleanup process.

Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binac...@amarulasolutions.com>
---

(no changes since v3)

Changes in v3:
- Use commit sha1 with 13 digits.
- Fix code style warnings raised by patman.
- Add the SPDX-License-Identifier tag.

Changes in v2:
- Use short-commit form.
- Remove linux info. Uboot seems that backport without add this
  extra information.
- Adjust the include file in nand_samsung.

 drivers/mtd/nand/raw/Makefile       |  3 +-
 drivers/mtd/nand/raw/nand_base.c    | 52 ++---------------
 drivers/mtd/nand/raw/nand_ids.c     |  4 +-
 drivers/mtd/nand/raw/nand_samsung.c | 90 +++++++++++++++++++++++++++++
 include/linux/mtd/rawnand.h         |  2 +
 5 files changed, 100 insertions(+), 51 deletions(-)
 create mode 100644 drivers/mtd/nand/raw/nand_samsung.c

diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index f278f31f5cd5..440290bed0fe 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
 obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
 obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
 obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
-obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_samsung.o
 obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
 obj-$(CONFIG_TPL_NAND_INIT) += nand.o
 ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
@@ -31,6 +31,7 @@ obj-y += nand_ids.o
 obj-y += nand_util.o
 obj-y += nand_ecc.o
 obj-y += nand_base.o
+obj-y += nand_samsung.o
 obj-y += nand_timings.o
 
 endif # not spl
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 174c760f3416..fe59157bc3c4 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4173,48 +4173,13 @@ void nand_decode_ext_id(struct nand_chip *chip)
        /*
         * Field definitions are in the following datasheets:
         * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-        * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
         * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
         *
         * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
         * ID to decide what to do.
         */
-       if (id_len == 6 && chip->id.data[0] == NAND_MFR_SAMSUNG &&
-           !nand_is_slc(chip) && chip->id.data[5] != 0x00) {
-               /* Calc pagesize */
-               mtd->writesize = 2048 << (extid & 0x03);
-               extid >>= 2;
-               /* Calc oobsize */
-               switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
-               case 1:
-                       mtd->oobsize = 128;
-                       break;
-               case 2:
-                       mtd->oobsize = 218;
-                       break;
-               case 3:
-                       mtd->oobsize = 400;
-                       break;
-               case 4:
-                       mtd->oobsize = 436;
-                       break;
-               case 5:
-                       mtd->oobsize = 512;
-                       break;
-               case 6:
-                       mtd->oobsize = 640;
-                       break;
-               case 7:
-               default: /* Other cases are "reserved" (unknown) */
-                       mtd->oobsize = 1024;
-                       break;
-               }
-               extid >>= 2;
-               /* Calc blocksize */
-               mtd->erasesize = (128 * 1024) <<
-                       (((extid >> 1) & 0x04) | (extid & 0x03));
-       } else if (id_len == 6 && chip->id.data[0] == NAND_MFR_HYNIX &&
-                       !nand_is_slc(chip)) {
+       if (id_len == 6 && chip->id.data[0] == NAND_MFR_HYNIX &&
+           !nand_is_slc(chip)) {
                unsigned int tmp;
 
                /* Calc pagesize */
@@ -4374,13 +4339,10 @@ static void nand_decode_bbm_options(struct mtd_info 
*mtd,
         * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
         * AMD/Spansion, and Macronix.  All others scan only the first page.
         */
-       if (!nand_is_slc(chip) &&
-                       (maf_id == NAND_MFR_SAMSUNG ||
-                        maf_id == NAND_MFR_HYNIX))
+       if (!nand_is_slc(chip) && maf_id == NAND_MFR_HYNIX)
                chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
        else if ((nand_is_slc(chip) &&
-                               (maf_id == NAND_MFR_SAMSUNG ||
-                                maf_id == NAND_MFR_HYNIX ||
+                               (maf_id == NAND_MFR_HYNIX ||
                                 maf_id == NAND_MFR_TOSHIBA ||
                                 maf_id == NAND_MFR_AMD ||
                                 maf_id == NAND_MFR_MACRONIX)) ||
@@ -4549,12 +4511,6 @@ struct nand_flash_dev *nand_get_flash_type(struct 
nand_chip *chip, int *maf_id,
        /* Get chip options */
        chip->options |= type->options;
 
-       /*
-        * Check if chip is not a Samsung device. Do not clear the
-        * options for chips which do not have an extended id.
-        */
-       if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
-               chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
 ident_done:
 
        if (chip->options & NAND_BUSWIDTH_AUTO) {
diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index 2a50f0b2144c..f4126c3a5a13 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -10,7 +10,7 @@
 #include <linux/mtd/rawnand.h>
 #include <linux/sizes.h>
 
-#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
+#define LP_OPTIONS 0
 #define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
 
 #define SP_OPTIONS NAND_NEED_READRDY
@@ -189,7 +189,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 /* Manufacturer IDs */
 struct nand_manufacturers nand_manuf_ids[] = {
        {NAND_MFR_TOSHIBA, "Toshiba"},
-       {NAND_MFR_SAMSUNG, "Samsung"},
+       {NAND_MFR_SAMSUNG, "Samsung", &samsung_nand_manuf_ops},
        {NAND_MFR_FUJITSU, "Fujitsu"},
        {NAND_MFR_NATIONAL, "National"},
        {NAND_MFR_RENESAS, "Renesas"},
diff --git a/drivers/mtd/nand/raw/nand_samsung.c 
b/drivers/mtd/nand/raw/nand_samsung.c
new file mode 100644
index 000000000000..0ab80621936f
--- /dev/null
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Free Electrons
+ * Copyright (C) 2017 NextThing Co
+ *
+ * Author: Boris Brezillon <boris.brezil...@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bug.h>
+#include <linux/mtd/rawnand.h>
+
+static void samsung_nand_decode_id(struct nand_chip *chip)
+{
+       struct mtd_info *mtd = nand_to_mtd(chip);
+
+       /* New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) */
+       if (chip->id.len == 6 && !nand_is_slc(chip) &&
+           chip->id.data[5] != 0x00) {
+               u8 extid = chip->id.data[3];
+
+               /* Get pagesize */
+               mtd->writesize = 2048 << (extid & 0x03);
+
+               extid >>= 2;
+
+               /* Get oobsize */
+               switch (((extid >> 2) & 0x4) | (extid & 0x3)) {
+               case 1:
+                       mtd->oobsize = 128;
+                       break;
+               case 2:
+                       mtd->oobsize = 218;
+                       break;
+               case 3:
+                       mtd->oobsize = 400;
+                       break;
+               case 4:
+                       mtd->oobsize = 436;
+                       break;
+               case 5:
+                       mtd->oobsize = 512;
+                       break;
+               case 6:
+                       mtd->oobsize = 640;
+                       break;
+               case 7:
+               default: /* Other cases are "reserved" (unknown) */
+                       WARN(1, "Invalid OOB size value");
+                       mtd->oobsize = 1024;
+                       break;
+               }
+
+               /* Get blocksize */
+               extid >>= 2;
+               mtd->erasesize = (128 * 1024) <<
+                                (((extid >> 1) & 0x04) | (extid & 0x03));
+       } else {
+               nand_decode_ext_id(chip);
+       }
+}
+
+static int samsung_nand_init(struct nand_chip *chip)
+{
+       struct mtd_info *mtd = nand_to_mtd(chip);
+
+       if (mtd->writesize > 512)
+               chip->options |= NAND_SAMSUNG_LP_OPTIONS;
+
+       if (!nand_is_slc(chip))
+               chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+       else
+               chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+
+       return 0;
+}
+
+const struct nand_manufacturer_ops samsung_nand_manuf_ops = {
+       .detect = samsung_nand_decode_id,
+       .init = samsung_nand_init,
+};
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 8fb2a43296f5..d0312e924b4d 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1158,6 +1158,8 @@ struct nand_manufacturers {
 extern struct nand_flash_dev nand_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
+extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+
 int nand_default_bbt(struct mtd_info *mtd);
 int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
 int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
-- 
2.32.0

Reply via email to