Hi Frieder, On 13.07.22 11:52, Frieder Schrempf wrote:
From: Frieder Schrempf <frieder.schre...@kontron.de>
Series raises a warning and I cannot merge it. Can you fix it and repost ? Thanks !
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471281 Best regards, Stefano
This set contains several improvements for the kontron-sl-mx8mm board configuration (patches 1 to 13) and support for a new SoM (patch 14, including baseboard) that complies to the Open Standard Module (OSM) 1.0 hardware specification, size S (https://sget.org/standards/osm). Frieder Schrempf (14): imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees imx: kontron-sl-mx8mm: Add redundant environment imx: kontron-sl-mx8mm: Enable environment in MMC imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT imx: kontron-sl-mx8mm: Enable bootaux command imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types imx: kontron-sl-mx8mm: Adjust board and SoM model strings imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names imx: kontron-sl-mx8mm: Simplify code in spl.c imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S arch/arm/dts/Makefile | 1 - .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 - arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 - .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 7 +- arch/arm/dts/imx8mm-kontron-n801x-s.dts | 5 +- arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 30 +- .../dts/imx8mm-kontron-n802x-s-u-boot.dtsi | 6 + arch/arm/dts/imx8mm-kontron-n802x-s.dts | 376 ++++ arch/arm/dts/imx8mm-kontron-n802x-som.dtsi | 309 +++ ...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} | 8 +- board/kontron/sl-mx8mm/MAINTAINERS | 1 + board/kontron/sl-mx8mm/lpddr4_timing.c | 1969 ++++++++--------- board/kontron/sl-mx8mm/sl-mx8mm.c | 41 + board/kontron/sl-mx8mm/sl-mx8mm.env | 7 + board/kontron/sl-mx8mm/spl.c | 85 +- configs/kontron-sl-mx8mm_defconfig | 10 +- doc/board/kontron/sl-mx8mm.rst | 7 +- include/configs/kontron-sl-mx8mm.h | 16 +- 18 files changed, 1717 insertions(+), 1283 deletions(-) delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} (88%) create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env
-- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
