Hi Jesse, I get errors as soon as I merge the series:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471284 In fact, you add new CONFIG_ but not via Kbuild: CONFIG_SPL_STACK CONFIG_SYS_FSL_ERRATUM_ESDHC135 Check this job, too: https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471287 Best regards, Stefano On 17.06.22 18:42, Jesse Taube wrote:
This patchset contains: - i.MXRT1170 clock driver adaption - i.MXRT1170-evk basic support Jesse Taube (8): imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header dt-bindings: imx: Add clock binding for i.MXRT1170 clk: imx: Add i.MXRT11xx pllv3 variant clk: imx: Add initial support for i.MXRT1170 clock driver RAM: Add changes for i.MXRT11xx series ARM: dts: imx: add i.MXRT1170-EVK support ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig arch/arm/dts/Makefile | 3 +- arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 94 + arch/arm/dts/imxrt1170-evk.dts | 250 +++ arch/arm/dts/imxrt1170-pinfunc.h | 1561 +++++++++++++++++ arch/arm/dts/imxrt1170.dtsi | 257 +++ arch/arm/include/asm/arch-imx/cpu.h | 1 + arch/arm/mach-imx/imxrt/Kconfig | 9 + arch/arm/mach-imx/imxrt/soc.c | 2 + board/freescale/imxrt1170-evk/Kconfig | 22 + board/freescale/imxrt1170-evk/MAINTAINERS | 7 + board/freescale/imxrt1170-evk/Makefile | 6 + board/freescale/imxrt1170-evk/imximage.cfg | 32 + board/freescale/imxrt1170-evk/imxrt1170-evk.c | 80 + configs/imxrt1170-evk_defconfig | 67 + drivers/clk/imx/Kconfig | 16 + drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imxrt1170.c | 221 +++ drivers/clk/imx/clk-pllv3.c | 56 +- drivers/clk/imx/clk.h | 1 + drivers/ram/imxrt_sdram.c | 9 + include/configs/imxrt1170-evk.h | 37 + include/dt-bindings/clock/imxrt1170-clock.h | 48 + include/dt-bindings/memory/imxrt-sdram.h | 1 + 23 files changed, 2777 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/imxrt1170-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imxrt1170-evk.dts create mode 100644 arch/arm/dts/imxrt1170-pinfunc.h create mode 100644 arch/arm/dts/imxrt1170.dtsi create mode 100644 board/freescale/imxrt1170-evk/Kconfig create mode 100644 board/freescale/imxrt1170-evk/MAINTAINERS create mode 100644 board/freescale/imxrt1170-evk/Makefile create mode 100644 board/freescale/imxrt1170-evk/imximage.cfg create mode 100644 board/freescale/imxrt1170-evk/imxrt1170-evk.c create mode 100644 configs/imxrt1170-evk_defconfig create mode 100644 drivers/clk/imx/clk-imxrt1170.c create mode 100644 include/configs/imxrt1170-evk.h create mode 100644 include/dt-bindings/clock/imxrt1170-clock.h
-- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
