Now that we are about to enable DM_ETH by default, remove legacy code.
Cc: Alison Wang <alison.w...@nxp.com>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
board/freescale/common/Makefile | 1 -
board/freescale/common/sgmii_riser.c | 130 -----------------
board/freescale/ls1021aiot/ls1021aiot.c | 38 -----
board/freescale/ls1021aqds/Makefile | 1 -
board/freescale/ls1021aqds/eth.c | 186 ------------------------
include/configs/ls1021aqds.h | 8 -
6 files changed, 364 deletions(-)
delete mode 100644 board/freescale/common/sgmii_riser.c
delete mode 100644 board/freescale/ls1021aqds/eth.c
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 7c93d30e1d2a..377c6aa077dc 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -41,7 +41,6 @@ obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
-obj-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o
ifndef CONFIG_RAMBOOT_PBL
obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o
endif
diff --git a/board/freescale/common/sgmii_riser.c
b/board/freescale/common/sgmii_riser.c
deleted file mode 100644
index 23157930101f..000000000000
--- a/board/freescale/common/sgmii_riser.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Freescale SGMII Riser Card
- *
- * This driver supports the SGMII Riser card found on the
- * "DS" style of development board from Freescale.
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <log.h>
-#include <net.h>
-#include <linux/libfdt.h>
-#include <tsec.h>
-#include <fdt_support.h>
-
-void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- if (tsec_info[i].flags & TSEC_SGMII)
- tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
-}
-
-void fsl_sgmii_riser_fdt_fixup(void *fdt)
-{
- struct eth_device *dev;
- int node;
- int mdio_node;
- int i = -1;
- int etsec_num = 0;
-
- node = fdt_path_offset(fdt, "/aliases");
- if (node < 0)
- return;
-
- while ((dev = eth_get_dev_by_index(++i)) != NULL) {
- struct tsec_private *priv;
- int phy_node;
- int enet_node;
- uint32_t ph;
- char sgmii_phy[16];
- char enet[16];
- const u32 *phyh;
- const char *model;
- const char *path;
-
- if (!strstr(dev->name, "eTSEC"))
- continue;
-
- priv = dev->priv;
- if (!(priv->flags & TSEC_SGMII)) {
- etsec_num++;
- continue;
- }
-
- mdio_node = fdt_node_offset_by_compatible(fdt, -1,
- "fsl,gianfar-mdio");
- if (mdio_node < 0)
- return;
-
- sprintf(sgmii_phy, "sgmii-phy@%d", etsec_num);
- phy_node = fdt_subnode_offset(fdt, mdio_node, sgmii_phy);
- if (phy_node > 0) {
- fdt_increase_size(fdt, 32);
- ph = fdt_create_phandle(fdt, phy_node);
- if (!ph)
- continue;
- }
-
- sprintf(enet, "ethernet%d", etsec_num++);
- path = fdt_getprop(fdt, node, enet, NULL);
- if (!path) {
- debug("No alias for %s\n", enet);
- continue;
- }
-
- enet_node = fdt_path_offset(fdt, path);
- if (enet_node < 0)
- continue;
-
- model = fdt_getprop(fdt, enet_node, "model", NULL);
-
- /*
- * We only want to do this to eTSECs. On some platforms
- * there are more than one type of gianfar-style ethernet
- * controller, and as we are creating an implicit connection
- * between ethernet nodes and eTSEC devices, it is best to
- * make the connection use as much explicit information
- * as exists.
- */
- if (!strstr(model, "TSEC"))
- continue;
-
- if (phy_node < 0) {
- /*
- * This part is only for old device tree without
- * sgmii_phy nodes. It's kept just for compatible
- * reason. Soon to be deprecated if all device tree
- * get updated.
- */
- phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
- if (!phyh)
- continue;
-
- phy_node = fdt_node_offset_by_phandle(fdt,
- fdt32_to_cpu(*phyh));
-
- priv = dev->priv;
-
- if (priv->flags & TSEC_SGMII)
- fdt_setprop_cell(fdt, phy_node, "reg",
- priv->phyaddr);
- } else {
- fdt_setprop(fdt, enet_node, "phy-handle", &ph,
- sizeof(ph));
- fdt_setprop_string(fdt, enet_node,
- "phy-connection-type",
- phy_string_for_interface(
- PHY_INTERFACE_MODE_SGMII));
- }
- }
-}
diff --git a/board/freescale/ls1021aiot/ls1021aiot.c
b/board/freescale/ls1021aiot/ls1021aiot.c
index 5ab03b334041..3ed6100b7cf0 100644
--- a/board/freescale/ls1021aiot/ls1021aiot.c
+++ b/board/freescale/ls1021aiot/ls1021aiot.c
@@ -109,44 +109,6 @@ int dram_init(void)
return 0;
}
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(struct bd_info *bis)
-{
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[4];
- int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- if (is_serdes_configured(SGMII_TSEC1)) {
- puts("eTSEC1 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- if (is_serdes_configured(SGMII_TSEC2)) {
- puts("eTSEC2 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
- if (!num) {
- printf("No TSECs initialized\n");
- return 0;
- }
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
- fsl_pq_mdio_init(bis, &mdio_info);
-
- tsec_eth_init(bis, tsec_info, num);
-
- return pci_eth_init(bis);
-}
-#endif
-
int board_early_init_f(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
diff --git a/board/freescale/ls1021aqds/Makefile
b/board/freescale/ls1021aqds/Makefile
index 65030342be3c..8cbf33fa0cef 100644
--- a/board/freescale/ls1021aqds/Makefile
+++ b/board/freescale/ls1021aqds/Makefile
@@ -6,5 +6,4 @@
obj-y += ls1021aqds.o
obj-y += ddr.o
-obj-y += eth.o
obj-$(CONFIG_ARMV7_PSCI) += psci.o
diff --git a/board/freescale/ls1021aqds/eth.c b/board/freescale/ls1021aqds/eth.c
deleted file mode 100644
index a9f162b974d4..000000000000
--- a/board/freescale/ls1021aqds/eth.c
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This file handles the board muxing between the RGMII/SGMII PHYs on
- * Freescale LS1021AQDS board. The RGMII PHYs are the three on-board 1Gb
- * ports. The SGMII PHYs are provided by the standard Freescale four-port
- * SGMII riser card.
- *
- * Muxing is handled via the PIXIS BRDCFG4 register. The EMI1 bits control
- * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII depends
- * on which port is used. The value for SGMII depends on which slot the riser
- * is inserted in.
- */
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/arch/fsl_serdes.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <malloc.h>
-
-#include "../common/sgmii_riser.h"
-#include "../common/qixis.h"
-
-#define EMI1_MASK 0x1f
-#define EMI1_RGMII0 1
-#define EMI1_RGMII1 2
-#define EMI1_RGMII2 3
-#define EMI1_SGMII1 0x1c
-#define EMI1_SGMII2 0x1d
-
-struct ls1021a_mdio {
- struct mii_dev *realbus;
-};
-
-static void ls1021a_mux_mdio(int addr)
-{
- u8 brdcfg4;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= EMI1_MASK;
-
- switch (addr) {
- case EMI1_RGMII0:
- brdcfg4 |= 0;
- break;
- case EMI1_RGMII1:
- brdcfg4 |= 0x20;
- break;
- case EMI1_RGMII2:
- brdcfg4 |= 0x40;
- break;
- case EMI1_SGMII1:
- brdcfg4 |= 0x60;
- break;
- case EMI1_SGMII2:
- brdcfg4 |= 0x80;
- break;
- default:
- brdcfg4 |= 0xa0;
- break;
- }
-
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int ls1021a_mdio_read(struct mii_dev *bus, int addr, int devad,
- int regnum)
-{
- struct ls1021a_mdio *priv = bus->priv;
-
- ls1021a_mux_mdio(addr);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int ls1021a_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct ls1021a_mdio *priv = bus->priv;
-
- ls1021a_mux_mdio(addr);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int ls1021a_mdio_reset(struct mii_dev *bus)
-{
- struct ls1021a_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static int ls1021a_mdio_init(char *realbusname, char *fakebusname)
-{
- struct ls1021a_mdio *lsmdio;
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate LS102xA MDIO bus\n");
- return -1;
- }
-
- lsmdio = malloc(sizeof(*lsmdio));
- if (!lsmdio) {
- printf("Failed to allocate LS102xA private data\n");
- free(bus);
- return -1;
- }
-
- bus->read = ls1021a_mdio_read;
- bus->write = ls1021a_mdio_write;
- bus->reset = ls1021a_mdio_reset;
- strcpy(bus->name, fakebusname);
-
- lsmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
- if (!lsmdio->realbus) {
- printf("No bus with name %s\n", realbusname);
- free(bus);
- free(lsmdio);
- return -1;
- }
-
- bus->priv = lsmdio;
-
- return mdio_register(bus);
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[3];
- int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- if (is_serdes_configured(SGMII_TSEC1)) {
- puts("eTSEC1 is in sgmii mode\n");
- tsec_info[num].flags |= TSEC_SGMII;
- tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
- } else {
- tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- if (is_serdes_configured(SGMII_TSEC2)) {
- puts("eTSEC2 is in sgmii mode\n");
- tsec_info[num].flags |= TSEC_SGMII;
- tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
- } else {
- tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC3
- SET_STD_TSEC_INFO(tsec_info[num], 3);
- tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
- num++;
-#endif
- if (!num) {
- printf("No TSECs initialized\n");
- return 0;
- }
-
-#ifdef CONFIG_FSL_SGMII_RISER
- fsl_sgmii_riser_init(tsec_info, num);
-#endif
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
-
- fsl_pq_mdio_init(bis, &mdio_info);
-
- /* Register the virtual MDIO front-ends */
- ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_RGMII_MDIO");
- ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_SGMII_MDIO");
-
- tsec_eth_init(bis, tsec_info, num);
-
- return pci_eth_init(bis);
-}
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index d9a973c13fba..aaf28a346d05 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -285,14 +285,6 @@
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define TSEC3_PHYIDX 0
-
-#define CONFIG_FSL_SGMII_RISER 1
-#define SGMII_RISER_PHY_OFFSET 0x1b
-
-#ifdef CONFIG_FSL_SGMII_RISER
-#define CONFIG_SYS_TBIPA_VALUE 8
-#endif
-
#endif
#define CONFIG_PEN_ADDR_BIG_ENDIAN
--
2.25.1
