Selecting this option can be handled in the Kconfig option itself, as it
is with BLK. Update this an drop the various 'select' clauses.
Signed-off-by: Simon Glass <s...@chromium.org>
---
(no changes since v1)
common/spl/Kconfig | 2 --
drivers/ata/Kconfig | 1 -
drivers/block/Kconfig | 11 +++++++----
drivers/mmc/Kconfig | 1 -
drivers/nvme/Kconfig | 1 -
drivers/scsi/Kconfig | 1 -
drivers/xen/Kconfig | 1 -
lib/efi_loader/Kconfig | 1 -
8 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 4c3e74ae5eb..759fb468d1a 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -792,7 +792,6 @@ config SPL_DM_MAILBOX
config SPL_MMC
bool "Support MMC"
depends on MMC
- select SPL_LEGACY_BLOCK
help
Enable support for MMC (Multimedia Card) within SPL. This enables
the MMC protocol implementation and allows any enabled drivers to
@@ -1318,7 +1317,6 @@ config SPL_THERMAL
config SPL_USB_HOST
bool "Support USB host drivers"
- select SPL_LEGACY_BLOCK
help
Enable access to USB (Universal Serial Bus) host devices so that
SPL can load U-Boot from a connected USB peripheral, such as a USB
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c3f2ac058a3..a063b221cd1 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -9,7 +9,6 @@ config AHCI
config SATA
bool "Support SATA controllers"
- select SPL_LEGACY_BLOCK
help
This enables support for SATA (Serial Advanced Technology
Attachment), a serial bus standard for connecting to hard drives and
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 5a0c434058a..e82a779e6b8 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -13,8 +13,14 @@ config BLK
config SPL_LEGACY_BLOCK
bool "Enable Legacy Block Device"
+ depends on SPL && !DM_SPL
+ default y if SPL_MMC || SPL_USB_STORAGE || SCSI || NVME || IDE
+ default y if SPL_AHCI_PCI
help
- Some devices require block support whether or not DM is enabled
+ Some devices require block support whether or not DM is enabled. This
+ is only supported in SPL. With this, the blk uclass is not used, but
+ instead a legacy implementation of block devices is used, with all
+ devices consisting of 'struct blk_desc' records.
config SPL_BLK
bool "Support block devices in SPL"
@@ -109,7 +115,6 @@ endif # EFI_MEDIA
config IDE
bool "Support IDE controllers"
- select SPL_LEGACY_BLOCK
help
Enables support for IDE (Integrated Drive Electronics) hard drives.
This allows access to raw blocks and filesystems on an IDE drive
@@ -222,7 +227,6 @@ endif # IDE
config LBA48
bool "Enable LBA support for disks larger than 137GB"
- depends on SPL_LEGACY_BLOCK
help
Set this to enable support for disks larger than 137GB.
Also look at CONFIG_SYS_64BIT_LBA. Without both of these, LBA48
@@ -231,7 +235,6 @@ config LBA48
config SYS_64BIT_LBA
bool "Enable 64bit number of blocks on a block device"
- depends on SPL_LEGACY_BLOCK
help
Make the block subsystem use 64bit sector addresses, rather than the
default of 32bit.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index d45ad1a541d..0679b7d9235 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,7 +3,6 @@ menu "MMC Host controller Support"
config MMC
bool "MMC/SD/SDIO card support"
default ARM || PPC || SANDBOX
- select SPL_LEGACY_BLOCK
select DM_MMC if DM
help
This selects MultiMediaCard, Secure Digital and Secure
diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig
index 7b6d54615f8..73edb355160 100644
--- a/drivers/nvme/Kconfig
+++ b/drivers/nvme/Kconfig
@@ -4,7 +4,6 @@
config NVME
bool "NVM Express device support"
- select SPL_LEGACY_BLOCK
help
This option enables support for NVM Express devices.
It supports basic functions of NVMe (read/write).
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 4d643816fcc..ad484ce8e88 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,6 +1,5 @@
config SCSI
bool "Support SCSI controllers"
- select SPL_LEGACY_BLOCK
help
This enables support for SCSI (Small Computer System Interface),
a parallel interface widely used with storage peripherals such as
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 20db2c53065..0ee74d036c7 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -2,7 +2,6 @@ config PVBLOCK
bool "Xen para-virtualized block device"
depends on DM
select BLK
- select SPL_LEGACY_BLOCK
help
This driver implements the front-end of the Xen virtual
block device driver. It communicates with a back-end driver
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 5feafc16820..4305839e5ec 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -20,7 +20,6 @@ config EFI_LOADER
select EVENT_DYNAMIC
select LIB_UUID
imply PARTITION_UUIDS
- select SPL_LEGACY_BLOCK
select REGEX
imply FAT
imply FAT_WRITE
--
2.37.1.595.g718a3a8f04-goog
