Hi Nikita,
On 8/11/22 5:37 AM, Nikita Shubin wrote:
From: Nikita Shubin <n.shu...@yadro.com>
U-Boot and SPL don't necessary share the same location, so we might end
with XIP SPL and U-Boot in "normal" memory.
This adds an option special for SPL to behave it in XIP manner and don't
use hart_lottery and available_harts_lock.
Signed-off-by: Nikita Shubin <n.shu...@yadro.com>
---
On a stylistic note, typically cover letters are not used for single
patches (but feel free to use them for larger series).
arch/riscv/cpu/cpu.c | 2 +-
arch/riscv/cpu/start.S | 4 ++--
arch/riscv/include/asm/global_data.h | 2 +-
arch/riscv/lib/asm-offsets.c | 2 +-
arch/riscv/lib/smp.c | 2 +-
common/spl/Kconfig | 5 +++++
include/configs/scr7_vcu118.h | 2 ++
7 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index 9f5fa0bcb3..89528748d7 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -19,7 +19,7 @@
* The variables here must be stored in the data section since they are used
* before the bss section is available.
*/
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
Shouldn't this be
#if CONFIG_IS_ENABLED(XIP)
?
ditto for the rest of these
u32 hart_lottery __section(".data") = 0;
/*
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 26cb877ed1..d824990778 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -122,7 +122,7 @@ call_board_init_f_0:
call_harts_early_init:
jal harts_early_init
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
/*
* Pick hart to initialize global data and run U-Boot. The other harts
* wait for initialization to complete.
@@ -155,7 +155,7 @@ call_harts_early_init:
/* save the boot hart id to global_data */
SREG tp, GD_BOOT_HART(gp)
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
la t0, available_harts_lock
amoswap.w.rl zero, zero, 0(t0)
diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h
index 9a146d1d49..d71e09c5ab 100644
--- a/arch/riscv/include/asm/global_data.h
+++ b/arch/riscv/include/asm/global_data.h
@@ -30,7 +30,7 @@ int iccm[CONFIG_NR_CPUS];
#if CONFIG_IS_ENABLED(SMP)
struct ipi_data ipi[CONFIG_NR_CPUS];
#endif
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
ulong available_harts;
#endif
};
diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c
index f1fe089b3d..bcb3c78654 100644
--- a/arch/riscv/lib/asm-offsets.c
+++ b/arch/riscv/lib/asm-offsets.c
@@ -16,7 +16,7 @@ int main(void)
{
DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart));
DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr));
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts));
#endif
diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c
index ba992100ad..cef324954c 100644
--- a/arch/riscv/lib/smp.c
+++ b/arch/riscv/lib/smp.c
@@ -45,7 +45,7 @@ static int send_ipi_many(struct ipi_data *ipi, int wait)
continue;
}
-#ifndef CONFIG_XIP
+#if !defined(CONFIG_XIP) && !defined(CONFIG_SPL_XIP)
/* skip if hart is not available */
if (!(gd->arch.available_harts & (1 << reg)))
continue;
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 07c03d611d..f24e423fc0 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -27,6 +27,11 @@ config SPL_FRAMEWORK
supports MMC, NAND and YMODEM and other methods loading of U-Boot
and the Linux Kernel. If unsure, say Y.
+config SPL_XIP
+ bool "Support SPL in XIP"
+ help
+ Enable this if SPL is in XIP memory.
Can you add another sentence or two? What is "XIP memory"? How does it differ
from the standard boot process?
Also, it seems like we already have SPL_XIP_SUPPORT. Maybe we can reuse that?
config SPL_FRAMEWORK_BOARD_INIT_F
bool "Define a generic function board_init_f"
depends on SPL_FRAMEWORK
diff --git a/include/configs/scr7_vcu118.h b/include/configs/scr7_vcu118.h
index 34545255d1..8f3ba36ce1 100644
--- a/include/configs/scr7_vcu118.h
+++ b/include/configs/scr7_vcu118.h
@@ -29,6 +29,8 @@
#define SCR7_OCRAM_REGION_SIZE 0xffff
#define SCR7L2_CACHE 1
+
+#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
#endif
#define CONFIG_SYS_FLASH_BASE 0x00000fffff030000
What is this part doing? It's not mentioned in the commit message.
--Sean
