We can load the ramdisk as the last step. This way we don't have to set
the intermediate variable 'ramdisk_len' and can remove it.
Signed-off-by: Michael Walle <mich...@walle.cc>
---
include/configs/lsxl.h | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index fb9a8c5032..7c2c0e22ad 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -34,25 +34,22 @@
"&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
- "&& tftpboot ${ramdisk_addr} initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
"&& tftpboot ${fdt_addr} ${fdtfile} " \
+ "&& tftpboot ${ramdisk_addr} initrd.img " \
"&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
+ "${ramdisk_addr}:${filesize} ${fdt_addr}\0" \
"bootcmd_hdd=sata init " \
"&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \
- "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
"&& load sata ${hdpart} ${fdt_addr} /dtb " \
+ "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \
"&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
+ "${ramdisk_addr}:${filesize} ${fdt_addr}\0" \
"bootcmd_usb=usb start " \
"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
- "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
- "&& setenv ramdisk_len ${filesize} " \
"&& load usb 0:1 ${fdt_addr} ${fdtfile} " \
+ "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
"&& bootz ${kernel_addr} " \
- "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
+ "${ramdisk_addr}:${filesize} ${fdt_addr}\0" \
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
"setenv autoload no " \
--
2.30.2
