I had not used patman in the first instance and Matthias Brugger was not cc’ed with the patch properly. Given that I had no feedback, I thought best to resubmit via patman this time in case it had not been seen the first time because of this. However patman also picked up a different series title and did not allow for superseding the first submission.
I hope this lapse in process does not reflect too badly on this patch. Regards > Le 19 août 2022 à 16:15, Peter Robinson <pbrobin...@gmail.com> a écrit : > Why did you need to resend it? > > On Fri, Aug 19, 2022 at 3:08 PM Antoine Mazeas <anto...@karthanis.net> wrote: >> >> Sjoerd Simons submitted the original patch (0001) to carry over some >> firmware-provided properties into the loaded device tree. This did not fix >> an issue with Raspberry Pi 400 rev 1.1 boards which would not be able to >> find the ethernet PHY device at the address specified by the kernel device >> tree. >> >> Patch 0002 expands on Sjoerd's design to also carry over the real ethernet >> PHY address, enabling the kernel to find and enable a working ethernet on >> pi 400 rev 1.1 boards. >> >> >> Antoine Mazeas (2): >> rpi: Copy properties from firmware dtb to the loaded dtb >> rpi: Copy eth PHY address from fw DT to loaded DT >> >> board/raspberrypi/rpi/rpi.c | 51 +++++++++++++++++++++++++++++++++++++ >> 1 file changed, 51 insertions(+) >> >> -- >> 2.37.2