BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zh...@broadcom.com>
---
(no changes since v2)
Changes in v2:
- Remove extra nodes from bcm963158.dts and keep it as a generic minimun
board support dts following other BCA chip convention.
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm63158.dtsi | 207 +++++++++++++---------
arch/arm/dts/bcm963158.dts | 121 +------------
arch/arm/mach-bcmbca/Kconfig | 8 +
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm63158/Kconfig | 17 ++
arch/arm/mach-bcmbca/bcm63158/Makefile | 5 +
arch/arm/mach-bcmbca/bcm63158/mmu_table.c | 32 ++++
board/broadcom/bcmbca/Kconfig | 7 +
configs/bcm963158_defconfig | 23 +++
include/configs/bcm963158.h | 11 ++
12 files changed, 239 insertions(+), 196 deletions(-)
create mode 100644 arch/arm/mach-bcmbca/bcm63158/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm63158/Makefile
create mode 100644 arch/arm/mach-bcmbca/bcm63158/mmu_table.c
create mode 100644 configs/bcm963158_defconfig
create mode 100644 include/configs/bcm963158.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f250942ced1..5b219d62f6bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -224,6 +224,7 @@ N: bcm[9]?4912
N: bcm[9]?63138
N: bcm[9]?63146
N: bcm[9]?63148
+N: bcm[9]?63158
N: bcm[9]?63178
N: bcm[9]?6756
N: bcm[9]?6813
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9a6582d9c1c8..a7fc3d7d7021 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1175,6 +1175,8 @@ dtb-$(CONFIG_BCM63146) += \
bcm963146.dtb
dtb-$(CONFIG_BCM63148) += \
bcm963148.dtb
+dtb-$(CONFIG_BCM63158) += \
+ bcm963158.dtb
dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
dtb-$(CONFIG_BCM6756) += \
diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
index 7dd285843849..8b179ba0fca8 100644
--- a/arch/arm/dts/bcm63158.dtsi
+++ b/arch/arm/dts/bcm63158.dtsi
@@ -1,122 +1,167 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Philippe Reynes <philippe.rey...@softathome.com>
+ * Copyright 2022 Broadcom Ltd.
*/
-#include "skeleton64.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- compatible = "brcm,bcm63158";
+ compatible = "brcm,bcm63158", "brcm,bcmbca";
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- spi0 = &hsspi;
- };
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
- u-boot,dm-pre-reloc;
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x0>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x1>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu2: cpu@2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x2>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu3: cpu@3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x3>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- l2: l2-cache0 {
+ L2_0: l2-cache0 {
compatible = "cache";
- u-boot,dm-pre-reloc;
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
clocks {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
u-boot,dm-pre-reloc;
-
- periph_osc: periph-osc {
+ periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <0xbebc200>;
- u-boot,dm-pre-reloc;
+ clock-frequency = <200000000>;
};
hsspi_pll: hsspi-pll {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
- clocks = <&periph_osc>;
+ clocks = <&periph_clk>;
clock-mult = <2>;
clock-div = <1>;
};
- refclk50mhz: refclk50mhz {
- compatible = "fixed-clock";
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
#clock-cells = <0>;
- clock-frequency = <50000000>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ wdt_clk: wdt-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
};
- ubus {
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
u-boot,dm-pre-reloc;
- uart0: serial@ff812000 {
+ uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xff812000 0x0 0x1000>;
- clock = <50000000>;
-
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- leds: led-controller@ff800800 {
+ leds: led-controller@800 {
compatible = "brcm,bcm6858-leds";
- reg = <0x0 0xff800800 0x0 0xe4>;
+ reg = <0x800 0xe4>;
status = "disabled";
};
- wdt1: watchdog@ff800480 {
+ wdt1: watchdog@480 {
compatible = "brcm,bcm6345-wdt";
- reg = <0x0 0xff800480 0x0 0x14>;
- clocks = <&refclk50mhz>;
+ reg = <0x480 0x14>;
+ clocks = <&wdt_clk>;
};
- wdt2: watchdog@ff8004c0 {
+ wdt2: watchdog@4c0 {
compatible = "brcm,bcm6345-wdt";
- reg = <0x0 0xff8004c0 0x0 0x14>;
- clocks = <&refclk50mhz>;
+ reg = <0x4c0 0x14>;
+ clocks = <&wdt_clk>;
};
wdt-reboot {
@@ -124,91 +169,91 @@
wdt = <&wdt1>;
};
- gpio0: gpio-controller@0xff800500 {
+ gpio0: gpio-controller@500 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800500 0x0 0x4>,
- <0x0 0xff800520 0x0 0x4>;
+ reg = <0x500 0x4>,
+ <0x520 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio1: gpio-controller@0xff800504 {
+ gpio1: gpio-controller@504 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800504 0x0 0x4>,
- <0x0 0xff800524 0x0 0x4>;
+ reg = <0x504 0x4>,
+ <0x524 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio2: gpio-controller@0xff800508 {
+ gpio2: gpio-controller@508 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800508 0x0 0x4>,
- <0x0 0xff800528 0x0 0x4>;
+ reg = <0x508 0x4>,
+ <0x528 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio3: gpio-controller@0xff80050c {
+ gpio3: gpio-controller@50c {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff80050c 0x0 0x4>,
- <0x0 0xff80052c 0x0 0x4>;
+ reg = <0x50c 0x4>,
+ <0x52c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio4: gpio-controller@0xff800510 {
+ gpio4: gpio-controller@510 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800510 0x0 0x4>,
- <0x0 0xff800530 0x0 0x4>;
+ reg = <0x510 0x4>,
+ <0x530 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio5: gpio-controller@0xff800514 {
+ gpio5: gpio-controller@514 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800514 0x0 0x4>,
- <0x0 0xff800534 0x0 0x4>;
+ reg = <0x514 0x4>,
+ <0x534 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio6: gpio-controller@0xff800518 {
+ gpio6: gpio-controller@518 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800518 0x0 0x4>,
- <0x0 0xff800538 0x0 0x4>;
+ reg = <0x518 0x4>,
+ <0x538 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio7: gpio-controller@0xff80051c {
+ gpio7: gpio-controller@51c {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff80051c 0x0 0x4>,
- <0x0 0xff80053c 0x0 0x4>;
+ reg = <0x51c 0x4>,
+ <0x53c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- hsspi: spi-controller@ff801000 {
+ hsspi: spi-controller@1000 {
compatible = "brcm,bcm6328-hsspi";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0xff801000 0x0 0x600>;
+ reg = <0x1000 0x600>;
clocks = <&hsspi_pll>, <&hsspi_pll>;
clock-names = "hsspi", "pll";
spi-max-frequency = <100000000>;
@@ -217,14 +262,14 @@
status = "disabled";
};
- nand: nand-controller@ff801800 {
+ nand: nand-controller@1800 {
compatible = "brcm,nand-bcm63158",
"brcm,brcmnand-v5.0",
"brcm,brcmnand";
reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x0 0xff801800 0x0 0x180>,
- <0x0 0xff802000 0x0 0x10>,
- <0x0 0xff801c00 0x0 0x200>;
+ reg = <0x1800 0x180>,
+ <0x2000 0x10>,
+ <0x1c00 0x200>;
parameter-page-big-endian = <0>;
status = "disabled";
diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts
index c2bdd332745d..eba07e0b1ca6 100644
--- a/arch/arm/dts/bcm963158.dts
+++ b/arch/arm/dts/bcm963158.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (C) 2019 Philippe Reynes <philippe.rey...@softathome.com>
+ * Copyright 2022 Broadcom Ltd.
*/
/dts-v1/;
@@ -8,8 +8,8 @@
#include "bcm63158.dtsi"
/ {
- model = "Broadcom bcm963158";
- compatible = "broadcom,bcm963158", "brcm,bcm63158";
+ model = "Broadcom BCM963158 Reference Board";
+ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
aliases {
serial0 = &uart0;
@@ -19,121 +19,12 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
+ reg = <0x0 0x0 0x0 0x08000000>;
};
};
&uart0 {
- u-boot,dm-pre-reloc;
status = "okay";
};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&gpio4 {
- status = "okay";
-};
-
-&gpio5 {
- status = "okay";
-};
-
-&gpio6 {
- status = "okay";
-};
-
-&gpio7 {
- status = "okay";
-};
-
-&nand {
- status = "okay";
- write-protect = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- nandcs@0 {
- compatible = "brcm,nandcs";
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- brcm,nand-oob-sector-size = <16>;
- };
-};
-
-&leds {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- brcm,serial-led-en-pol;
- brcm,serial-led-data-ppol;
-
- led@16 {
- reg = <16>;
- label = "red:dsl2";
- };
-
- led@17 {
- reg = <17>;
- label = "green:dsl1";
- };
-
- led@18 {
- reg = <18>;
- label = "green:fxs2";
- };
-
- led@19 {
- reg = <19>;
- label = "green:fxs1";
- };
-
- led@26 {
- reg = <26>;
- label = "green:wan1_act";
- };
-
- led@27 {
- reg = <27>;
- label = "green:wps";
- };
-
- led@28 {
- reg = <28>;
- active-low;
- label = "green:aggregate_act";
- };
-
- led@29 {
- reg = <29>;
- label = "green:aggregate_link";
- };
-};
-
-&hsspi {
- status = "okay";
-
- flash: mt25@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <25000000>;
- };
-};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index eb03ef42b8d2..d78618820b58 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -48,6 +48,13 @@ config BCM63148
select DM_SERIAL
select BCM6345_SERIAL
+config BCM63158
+ bool "Support for Broadcom 63158 Family"
+ select ARM64
+ select SYS_ARCH_TIMER
+ select DM_SERIAL
+ select PL01X_SERIAL
+
config BCM63178
bool "Support for Broadcom 63178 Family"
select SYS_ARCH_TIMER
@@ -89,6 +96,7 @@ source "arch/arm/mach-bcmbca/bcm4912/Kconfig"
source "arch/arm/mach-bcmbca/bcm63138/Kconfig"
source "arch/arm/mach-bcmbca/bcm63146/Kconfig"
source "arch/arm/mach-bcmbca/bcm63148/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63158/Kconfig"
source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
source "arch/arm/mach-bcmbca/bcm6813/Kconfig"
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index c8c344ba7271..e5df60e7648b 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_BCM4912) += bcm4912/
obj-$(CONFIG_BCM63138) += bcm63138/
obj-$(CONFIG_BCM63146) += bcm63146/
obj-$(CONFIG_BCM63148) += bcm63148/
+obj-$(CONFIG_BCM63158) += bcm63158/
obj-$(CONFIG_BCM63178) += bcm63178/
obj-$(CONFIG_BCM6756) += bcm6756/
obj-$(CONFIG_BCM6813) += bcm6813/
diff --git a/arch/arm/mach-bcmbca/bcm63158/Kconfig
b/arch/arm/mach-bcmbca/bcm63158/Kconfig
new file mode 100644
index 000000000000..b77444369ec9
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63158/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63158
+
+config TARGET_BCM963158
+ bool "Broadcom 63158 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm63158"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm63158/Makefile
b/arch/arm/mach-bcmbca/bcm63158/Makefile
new file mode 100644
index 000000000000..62624977034b
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63158/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj-y += mmu_table.o
diff --git a/arch/arm/mach-bcmbca/bcm63158/mmu_table.c
b/arch/arm/mach-bcmbca/bcm63158/mmu_table.c
new file mode 100644
index 000000000000..fe7efb30e22b
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63158/mmu_table.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+
+static struct mm_region bcm963158_mem_map[] = {
+ {
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 1UL * SZ_1G,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ },
+ {
+ /* SoC peripheral */
+ .virt = 0xff800000UL,
+ .phys = 0xff800000UL,
+ .size = 0x100000,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ },
+ {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = bcm963158_mem_map;
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index c9155fb48e0a..13815fd7975f 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -51,6 +51,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM963158
+
+config SYS_CONFIG_NAME
+ default "bcm963158"
+
+endif
+
if TARGET_BCM963178
config SYS_CONFIG_NAME
diff --git a/configs/bcm963158_defconfig b/configs/bcm963158_defconfig
new file mode 100644
index 000000000000..b585adbd9b37
--- /dev/null
+++ b/configs/bcm963158_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63158=y
+CONFIG_TARGET_BCM963158=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
+CONFIG_IDENT_STRING=" Broadcom BCM63158"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm963158.h b/include/configs/bcm963158.h
new file mode 100644
index 000000000000..b15c4111c967
--- /dev/null
+++ b/include/configs/bcm963158.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963158_H
+#define __BCM963158_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
smime.p7s
Description: S/MIME Cryptographic Signature
