Hello Pali, > -----Original Message----- > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Pali Rohar > Sent: Monday, September 5, 2022 10:59 AM > To: u-boot@lists.denx.de > Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception > > On Monday 05 September 2022 10:53:58 Johannes Schneider wrote: > > while writing to a imx-serial device is probably thoroughly tested - and > obviosly works for the debug-serial - using a serial driver to read data > received > over the serial interface does not work reliably. > > > > the patches in this series address issues found during the implementation > > of a > custom uboot-command to query a coprocessor, connected to an imx8mm over > uart4, > for mainboard-identification strings > > > > > > Johannes Schneider (2): > > serial: mxc: enable the RX pipeline > > serial: mxc: have putc use the TXFIFO > > > > drivers/serial/serial_mxc.c | 13 ++++++++++++- > > 1 file changed, 12 insertions(+), 1 deletion(-) > > Hello! I'm really not maintainer of mxc and I do not have time to review > those patches. So please do not send me them as I'm spammed with tons of > unrelated emails/patches.
Then there is a problem with having your name as a maintainer for this file. If I execute: $ ./scripts/get_maintainer.pl drivers/serial/serial_mxc.c "Pali Rohár" <p...@kernel.org> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:2/2=100%,removed_lines:2/2=100%) u-boot@lists.denx.de (open list) I guess this has to be corrected then, right? Regards, Andrey