Device tree alignment with Linux kernel v6.0-rc3:
- ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
- ARM: dts: stm32: Add alternate pinmux for RCC pin
- ARM: dts: stm32: Add alternate pinmux for DCMI pins
- ARM: dts: stm32: Add alternate pinmux for SPI2 pins
- ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15
- ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk
- ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13
- ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
arch/arm/dts/stm32mp13-u-boot.dtsi | 10 +++--
arch/arm/dts/stm32mp131.dtsi | 28 ++++++-------
arch/arm/dts/stm32mp135f-dk.dts | 4 +-
arch/arm/dts/stm32mp15-pinctrl.dtsi | 64 ++++++++++++++++++++++++++---
arch/arm/dts/stm32mp151.dtsi | 7 ++--
arch/arm/dts/stm32mp15xx-dkx.dtsi | 8 ++++
6 files changed, 91 insertions(+), 30 deletions(-)
diff --git a/arch/arm/dts/stm32mp13-u-boot.dtsi
b/arch/arm/dts/stm32mp13-u-boot.dtsi
index 01552adb7c4..47a43649bbb 100644
--- a/arch/arm/dts/stm32mp13-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp13-u-boot.dtsi
@@ -17,6 +17,12 @@
pinctrl0 = &pinctrl;
};
+ firmware {
+ optee {
+ u-boot,dm-pre-reloc;
+ };
+ };
+
/* need PSCI for sysreset during board_f */
psci {
u-boot,dm-pre-proper;
@@ -82,10 +88,6 @@
u-boot,dm-pre-reloc;
};
-&optee {
- u-boot,dm-pre-reloc;
-};
-
&pinctrl {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index 84e16bb2f2b..a1c6d0d00b5 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -27,21 +27,8 @@
interrupt-parent = <&intc>;
};
- scmi_sram: sram@2ffff000 {
- compatible = "mmio-sram";
- reg = <0x2ffff000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x2ffff000 0x1000>;
-
- scmi_shm: scmi_shm@0 {
- compatible = "arm,scmi-shmem";
- reg = <0 0x80>;
- };
- };
-
firmware {
- optee: optee {
+ optee {
method = "smc";
compatible = "linaro,optee-tz";
};
@@ -151,6 +138,19 @@
interrupt-parent = <&intc>;
ranges;
+ scmi_sram: sram@2ffff000 {
+ compatible = "mmio-sram";
+ reg = <0x2ffff000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2ffff000 0x1000>;
+
+ scmi_shm: scmi-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0 0x80>;
+ };
+ };
+
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index f436ffab998..e6b8ffd332c 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -31,8 +31,8 @@
#size-cells = <1>;
ranges;
- optee@de000000 {
- reg = <0xde000000 0x2000000>;
+ optee@dd000000 {
+ reg = <0xdd000000 0x3000000>;
no-map;
};
};
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi
b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index d3ed10335df..2cc9341d43d 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -151,6 +151,43 @@
};
};
+ dcmi_pins_c: dcmi-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('I', 6, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>;/* DCMI_D9 */
+ bias-pull-up;
+ };
+ };
+
+ dcmi_sleep_pins_c: dcmi-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC
*/
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC
*/
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK
*/
+ <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('I', 6, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>;/* DCMI_D9 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /*
ETH_RGMII_CLK125 */
@@ -923,6 +960,21 @@
};
};
+ mco1_pins_a: mco1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ mco1_sleep_pins_a: mco1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+ };
+ };
+
mco2_pins_a: mco2-0 {
pins {
pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
@@ -1814,30 +1866,30 @@
spi2_pins_a: spi2-0 {
pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+ pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
- pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
bias-disable;
};
};
spi2_pins_b: spi2-1 {
pins1 {
- pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+ pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
- pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
bias-disable;
};
};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 767a06ef684..f0fb022fc63 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1143,10 +1143,9 @@
reg = <0x4c001000 0x400>;
st,proc-id = <0>;
interrupts-extended =
- <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <&exti 61 1>;
- interrupt-names = "rx", "tx", "wakeup";
+ <&exti 61 1>,
+ <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
clocks = <&rcc IPCC>;
wakeup-source;
status = "disabled";
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi
b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 3d36cac9ed0..5a045d7156b 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -685,6 +685,14 @@
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* onboard HUB */
+ hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ vdd-supply = <&v3v3>;
+ };
};
&usbotg_hs {
--
2.25.1
