From: Sonic Zhang <sonic.zh...@analog.com>
Don't forget to count full data size for the multiblock operation request.
Signed-off-by: Sonic Zhang <sonic.zh...@analog.com>
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
drivers/mmc/bfin_sdh.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index f9da6a3..31b6459 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -114,11 +114,12 @@ static int sdh_setup_data(struct mmc *mmc, struct
mmc_data *data)
u16 data_ctl = 0;
u16 dma_cfg = 0;
int ret = 0;
+ unsigned long data_size = data->blocksize * data->blocks;
/* Don't support write yet. */
if (data->flags & MMC_DATA_WRITE)
return UNUSABLE_ERR;
- data_ctl |= ((ffs(data->blocksize) - 1) << 4);
+ data_ctl |= ((ffs(data_size) - 1) << 4);
data_ctl |= DTX_DIR;
bfin_write_SDH_DATA_CTL(data_ctl);
dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN;
@@ -126,13 +127,13 @@ static int sdh_setup_data(struct mmc *mmc, struct
mmc_data *data)
bfin_write_SDH_DATA_TIMER(-1);
blackfin_dcache_flush_invalidate_range(data->dest,
- data->dest + data->blocksize);
+ data->dest + data_size);
/* configure DMA */
bfin_write_DMA_START_ADDR(data->dest);
- bfin_write_DMA_X_COUNT(data->blocksize / 4);
+ bfin_write_DMA_X_COUNT(data_size / 4);
bfin_write_DMA_X_MODIFY(4);
bfin_write_DMA_CONFIG(dma_cfg);
- bfin_write_SDH_DATA_LGTH(data->blocksize);
+ bfin_write_SDH_DATA_LGTH(data_size);
/* kick off transfer */
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
