On Tue, 13 Sep 2022 18:10:28 +0200 Marek Behún <ka...@kernel.org> wrote:
> It seems that waiting only 10 ms after releasing LAN switch from reset > is not enough for the strapping pins to latch the requested values. > P6_MODE[0] is latched to 0 instead of 1. > > Increasing the delay to 50 ms fixes this issue. > > Signed-off-by: Marek Behún <ka...@kernel.org> > --- > board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c > b/board/CZ.NIC/turris_omnia/turris_omnia.c > index a7f96e5b77..19c5043fcb 100644 > --- a/board/CZ.NIC/turris_omnia/turris_omnia.c > +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c > @@ -654,7 +654,7 @@ static void initialize_switch(void) > ctrl[1] = EXT_CTL_nRES_LAN; > err = omnia_mcu_write(CMD_EXT_CONTROL, ctrl, sizeof(ctrl)); > > - mdelay(10); > + mdelay(50); > > /* Change RGMII pins back to RGMII mode */ > I forgot to add Fixes: 1da53ae26afc ("arm: mvebu: turris_omnia: Add support for design with SW reset signals")