When MMU is already enabled then dcache_enable() does not call mmu_setup()
and so setup_all_pgtables() is also never called.
In this situation when some driver calls mmu_set_region_dcache_behaviour()
function then U-Boot crashes with error message:
Emergency page table not setup.
Fix this issue by explicitly calling setup_all_pgtables() in dcache_enable()
function near condition for mmu_setup().
This change fixes chainloading U-Boot from U-Boot on Turris Mox board which
uses mvneta ethernet driver which calls mmu_set_region_dcache_behaviour().
Signed-off-by: Pali Rohár <p...@kernel.org>
---
arch/arm/cpu/armv8/cache_v8.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index e4736e564366..2a226fd0633d 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -503,6 +503,10 @@ void dcache_enable(void)
mmu_setup();
}
+ /* Set up page tables only once (it is done also by mmu_setup()) */
+ if (!gd->arch.tlb_fillptr)
+ setup_all_pgtables();
+
set_sctlr(get_sctlr() | CR_C);
}
--
2.20.1
