From: Peng Fan <peng....@nxp.com>
"alloc space exhausted" happens in very early stage, which could be seen
with DEBUG_UART options enabled and leeds to an non-functional board.
kontron_pitx_imx8m:
CONFIG_DEBUG_UART_BASE=0x30880000 # for serial3
CONFIG_DEBUG_UART_CLOCK=24000000
imx8mqevk:
CONFIG_DEBUG_UART_BASE=0x30860000 # for uart1
CONFIG_DEBUG_UART_CLOCK=24000000
It is because CONFIG_SYS_MALLOC_F_LEN is too small and still leave
CONFIG_SPL_SYS_MALLOC_F_LEN as 0x2000.
Reported-by: Heiko Thiery <heiko.thi...@gmail.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
V2:
set for all i.MX8MQ
Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index 991b260182e..c8c22555a94 100644
--- a/Kconfig
+++ b/Kconfig
@@ -299,7 +299,7 @@ config SYS_MALLOC_F_LEN
default 0x4000 if SANDBOX || RISCV || ARCH_APPLE || ROCKCHIP_RK3368 || \
ROCKCHIP_RK3399
default 0x8000 if RCAR_GEN3
- default 0x10000 if ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ)
+ default 0x10000 if ARCH_IMX8 || ARCH_IMX8M
default 0x2000
help
Before relocation, memory is very limited on many platforms. Still,
@@ -325,6 +325,7 @@ config SPL_SYS_MALLOC_F_LEN
depends on SYS_MALLOC_F && SPL
default 0 if !SPL_FRAMEWORK
default 0x2800 if RCAR_GEN3
+ default 0x2000 if IMX8MQ
default SYS_MALLOC_F_LEN
help
In SPL memory is very limited on many platforms. Still,
--
2.36.0
