Hi Stefano and Tom, On Sun, Aug 14, 2022 at 2:25 PM Marek Vasut <ma...@denx.de> wrote: > > On 8/13/22 14:03, Fabio Estevam wrote: > > From: Fabio Estevam <feste...@denx.de> > > > > When running the script to sign SPL/U-Boot on a kontron-sl-mx8mm board, > > the fit_block_size was calculated as 0x1000 instead of 0x1020. > > > > Add an extra parenthesis pair to fix it. > > > > Signed-off-by: Fabio Estevam <feste...@denx.de> > > --- > > Hi Stefano, > > > > This one applies against u-boot-imx. > > > > Since this one has not reached mainline yet, it is OK > > if you want to squash this change in the original commit. > > > > doc/imx/habv4/csf_examples/mx8m/csf.sh | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh > > b/doc/imx/habv4/csf_examples/mx8m/csf.sh > > index 6898513be51f..7d267a7218d3 100644 > > --- a/doc/imx/habv4/csf_examples/mx8m/csf.sh > > +++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh > > @@ -40,7 +40,7 @@ dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} > > conv=notrunc > > # fitImage tree > > fit_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SYS_TEXT_BASE=/ > > s@.*=@@p" .config) - $(sed -n "/CONFIG_FIT_EXTERNAL_OFFSET=/ s@.*=@@p" > > .config) - 0x200 - 0x40)) ) > > fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb > > /binman/imx-boot/uboot offset)) > > -fit_block_size=$(printf "0x%x" $(( ( $(fdtdump u-boot.itb 2>/dev/null | > > sed -n "/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & > > ~(0x1000 - 0x1) + 0x20 )) ) > > +fit_block_size=$(printf "0x%x" $(( ( ($(fdtdump u-boot.itb 2>/dev/null | > > sed -n "/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & > > ~(0x1000 - 0x1)) + 0x20 )) ) > > sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset > > $fit_block_size \"flash.bin\", \\\\@" csf_fit.tmp > > Reviewed-by: Marek Vasut <ma...@denx.de>
Could you please consider applying this one as a fix to 2022.10? Thanks