From: Quentin Schulz <quentin.sch...@theobroma-systems.com> Sync include/dt-bindings/input/linux-event-codes.h with include/uapi/linux/input-event-codes.h from Linux kernel v6.0-rc6.
Cc: Quentin Schulz <foss+ub...@0leil.net> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> --- include/dt-bindings/input/linux-event-codes.h | 173 +++++++++++++++++- 1 file changed, 170 insertions(+), 3 deletions(-) diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h index 331458c0e7..dff8e7f170 100644 --- a/include/dt-bindings/input/linux-event-codes.h +++ b/include/dt-bindings/input/linux-event-codes.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Input event codes * @@ -277,7 +278,8 @@ #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */ +#define KEY_DASHBOARD KEY_ALL_APPLICATIONS #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 @@ -406,6 +408,7 @@ #define BTN_TOOL_MOUSE 0x146 #define BTN_TOOL_LENS 0x147 #define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ +#define BTN_STYLUS3 0x149 #define BTN_TOUCH 0x14a #define BTN_STYLUS 0x14b #define BTN_STYLUS2 0x14c @@ -437,10 +440,12 @@ #define KEY_TITLE 0x171 #define KEY_SUBTITLE 0x172 #define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 +#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */ +#define KEY_ZOOM KEY_FULL_SCREEN #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 +#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */ +#define KEY_SCREEN KEY_ASPECT_RATIO #define KEY_PC 0x178 /* Media Select Computer */ #define KEY_TV 0x179 /* Media Select TV */ #define KEY_TV2 0x17a /* Media Select Cable */ @@ -511,6 +516,9 @@ #define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ #define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ #define KEY_IMAGES 0x1ba /* AL Image Browser */ +#define KEY_NOTIFICATION_CENTER 0x1bc /* Show/hide the notification center */ +#define KEY_PICKUP_PHONE 0x1bd /* Answer incoming call */ +#define KEY_HANGUP_PHONE 0x1be /* Decline incoming call */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 @@ -538,6 +546,7 @@ #define KEY_FN_F 0x1e2 #define KEY_FN_S 0x1e3 #define KEY_FN_B 0x1e4 +#define KEY_FN_RIGHT_SHIFT 0x1e5 #define KEY_BRL_DOT1 0x1f1 #define KEY_BRL_DOT2 0x1f2 @@ -592,6 +601,7 @@ #define BTN_DPAD_RIGHT 0x223 #define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ +#define KEY_ROTATE_LOCK_TOGGLE 0x231 /* Display rotation lock */ #define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */ #define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */ @@ -600,6 +610,10 @@ #define KEY_APPSELECT 0x244 /* AL Select Task/Application */ #define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ +#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ +#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ +#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */ +#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ @@ -611,6 +625,139 @@ #define KEY_KBDINPUTASSIST_ACCEPT 0x264 #define KEY_KBDINPUTASSIST_CANCEL 0x265 +/* Diagonal movement keys */ +#define KEY_RIGHT_UP 0x266 +#define KEY_RIGHT_DOWN 0x267 +#define KEY_LEFT_UP 0x268 +#define KEY_LEFT_DOWN 0x269 + +#define KEY_ROOT_MENU 0x26a /* Show Device's Root Menu */ +/* Show Top Menu of the Media (e.g. DVD) */ +#define KEY_MEDIA_TOP_MENU 0x26b +#define KEY_NUMERIC_11 0x26c +#define KEY_NUMERIC_12 0x26d +/* + * Toggle Audio Description: refers to an audio service that helps blind and + * visually impaired consumers understand the action in a program. Note: in + * some countries this is referred to as "Video Description". + */ +#define KEY_AUDIO_DESC 0x26e +#define KEY_3D_MODE 0x26f +#define KEY_NEXT_FAVORITE 0x270 +#define KEY_STOP_RECORD 0x271 +#define KEY_PAUSE_RECORD 0x272 +#define KEY_VOD 0x273 /* Video on Demand */ +#define KEY_UNMUTE 0x274 +#define KEY_FASTREVERSE 0x275 +#define KEY_SLOWREVERSE 0x276 +/* + * Control a data application associated with the currently viewed channel, + * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) + */ +#define KEY_DATA 0x277 +#define KEY_ONSCREEN_KEYBOARD 0x278 +/* Electronic privacy screen control */ +#define KEY_PRIVACY_SCREEN_TOGGLE 0x279 + +/* Select an area of screen to be copied */ +#define KEY_SELECTIVE_SCREENSHOT 0x27a + +/* Move the focus to the next or previous user controllable element within a UI container */ +#define KEY_NEXT_ELEMENT 0x27b +#define KEY_PREVIOUS_ELEMENT 0x27c + +/* Toggle Autopilot engagement */ +#define KEY_AUTOPILOT_ENGAGE_TOGGLE 0x27d + +/* Shortcut Keys */ +#define KEY_MARK_WAYPOINT 0x27e +#define KEY_SOS 0x27f +#define KEY_NAV_CHART 0x280 +#define KEY_FISHING_CHART 0x281 +#define KEY_SINGLE_RANGE_RADAR 0x282 +#define KEY_DUAL_RANGE_RADAR 0x283 +#define KEY_RADAR_OVERLAY 0x284 +#define KEY_TRADITIONAL_SONAR 0x285 +#define KEY_CLEARVU_SONAR 0x286 +#define KEY_SIDEVU_SONAR 0x287 +#define KEY_NAV_INFO 0x288 +#define KEY_BRIGHTNESS_MENU 0x289 + +/* + * Some keyboards have keys which do not have a defined meaning, these keys + * are intended to be programmed / bound to macros by the user. For most + * keyboards with these macro-keys the key-sequence to inject, or action to + * take, is all handled by software on the host side. So from the kernel's + * point of view these are just normal keys. + * + * The KEY_MACRO# codes below are intended for such keys, which may be labeled + * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys + * where the marking on the key does indicate a defined meaning / purpose. + * + * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing + * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO + * define MUST be added. + */ +#define KEY_MACRO1 0x290 +#define KEY_MACRO2 0x291 +#define KEY_MACRO3 0x292 +#define KEY_MACRO4 0x293 +#define KEY_MACRO5 0x294 +#define KEY_MACRO6 0x295 +#define KEY_MACRO7 0x296 +#define KEY_MACRO8 0x297 +#define KEY_MACRO9 0x298 +#define KEY_MACRO10 0x299 +#define KEY_MACRO11 0x29a +#define KEY_MACRO12 0x29b +#define KEY_MACRO13 0x29c +#define KEY_MACRO14 0x29d +#define KEY_MACRO15 0x29e +#define KEY_MACRO16 0x29f +#define KEY_MACRO17 0x2a0 +#define KEY_MACRO18 0x2a1 +#define KEY_MACRO19 0x2a2 +#define KEY_MACRO20 0x2a3 +#define KEY_MACRO21 0x2a4 +#define KEY_MACRO22 0x2a5 +#define KEY_MACRO23 0x2a6 +#define KEY_MACRO24 0x2a7 +#define KEY_MACRO25 0x2a8 +#define KEY_MACRO26 0x2a9 +#define KEY_MACRO27 0x2aa +#define KEY_MACRO28 0x2ab +#define KEY_MACRO29 0x2ac +#define KEY_MACRO30 0x2ad + +/* + * Some keyboards with the macro-keys described above have some extra keys + * for controlling the host-side software responsible for the macro handling: + * -A macro recording start/stop key. Note that not all keyboards which emit + * KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if + * KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START + * should be interpreted as a recording start/stop toggle; + * -Keys for switching between different macro (pre)sets, either a key for + * cycling through the configured presets or keys to directly select a preset. + */ +#define KEY_MACRO_RECORD_START 0x2b0 +#define KEY_MACRO_RECORD_STOP 0x2b1 +#define KEY_MACRO_PRESET_CYCLE 0x2b2 +#define KEY_MACRO_PRESET1 0x2b3 +#define KEY_MACRO_PRESET2 0x2b4 +#define KEY_MACRO_PRESET3 0x2b5 + +/* + * Some keyboards have a buildin LCD panel where the contents are controlled + * by the host. Often these have a number of keys directly below the LCD + * intended for controlling a menu shown on the LCD. These keys often don't + * have any labeling so we just name them KEY_KBD_LCD_MENU# + */ +#define KEY_KBD_LCD_MENU1 0x2b8 +#define KEY_KBD_LCD_MENU2 0x2b9 +#define KEY_KBD_LCD_MENU3 0x2ba +#define KEY_KBD_LCD_MENU4 0x2bb +#define KEY_KBD_LCD_MENU5 0x2bc + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 @@ -672,6 +819,16 @@ #define REL_DIAL 0x07 #define REL_WHEEL 0x08 #define REL_MISC 0x09 +/* + * 0x0a is reserved and should not be used in input drivers. + * It was used by HID as REL_MISC+1 and userspace needs to detect if + * the next REL_* event is correct or is just REL_MISC + n. + * We define here REL_RESERVED so userspace can rely on it and detect + * the situation described above. + */ +#define REL_RESERVED 0x0a +#define REL_WHEEL_HI_RES 0x0b +#define REL_HWHEEL_HI_RES 0x0c #define REL_MAX 0x0f #define REL_CNT (REL_MAX+1) @@ -708,6 +865,15 @@ #define ABS_MISC 0x28 +/* + * 0x2e is reserved and should not be used in input drivers. + * It was used by HID as ABS_MISC+6 and userspace needs to detect if + * the next ABS_* event is correct or is just ABS_MISC + n. + * We define here ABS_RESERVED so userspace can rely on it and detect + * the situation described above. + */ +#define ABS_RESERVED 0x2e + #define ABS_MT_SLOT 0x2f /* MT slot being modified */ #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ @@ -750,6 +916,7 @@ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ #define SW_PEN_INSERTED 0x0f /* set = pen inserted */ +#define SW_MACHINE_COVER 0x10 /* set = cover closed */ #define SW_MAX 0x10 #define SW_CNT (SW_MAX+1) -- 2.37.3
