Hi Michael, On Thu, Sep 22, 2022 at 3:39 PM Michael Trimarchi <mich...@amarulasolutions.com> wrote: > > Extract the information about ecc strength and ecc step size > from mtd controller. This information is usefull to check if > what we think as ecc is what we really configured. > > Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com> > --- > cmd/nand.c | 14 ++++++++------ > 1 file changed, 8 insertions(+), 6 deletions(-) > > diff --git a/cmd/nand.c b/cmd/nand.c > index e730484d0b..9a9794684b 100644 > --- a/cmd/nand.c > +++ b/cmd/nand.c > @@ -417,12 +417,14 @@ static void nand_print_and_set_info(int idx) > printf("%dx ", chip->numchips); > printf("%s, sector size %u KiB\n", > mtd->name, mtd->erasesize >> 10); > - printf(" Page size %8d b\n", mtd->writesize); > - printf(" OOB size %8d b\n", mtd->oobsize); > - printf(" Erase size %8d b\n", mtd->erasesize); > - printf(" subpagesize %8d b\n", chip->subpagesize); > - printf(" options 0x%08x\n", chip->options); > - printf(" bbt options 0x%08x\n", chip->bbt_options); > + printf(" Page size %8d b\n", mtd->writesize); > + printf(" OOB size %8d b\n", mtd->oobsize); > + printf(" Erase size %8d b\n", mtd->erasesize); > + printf(" ecc strength %8d bits\n", mtd->ecc_strength); > + printf(" ecc step size %8d b\n", mtd->ecc_step_size); > + printf(" subpagesize %8d b\n", chip->subpagesize); > + printf(" options 0x%08x\n", chip->options); > + printf(" bbt options 0x%08x\n", chip->bbt_options); > > /* Set geometry info */ > env_set_hex("nand_writesize", mtd->writesize); > -- > 2.34.1 >
Reviewed-by: Dario Binacchi <dario.binac...@amarulasolutions.com> Thanks and regards, Dario -- Dario Binacchi Embedded Linux Developer dario.binac...@amarulasolutions.com __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 i...@amarulasolutions.com www.amarulasolutions.com