On 22.09.22 17:03, Marcel Ziswiler wrote:
Hi Stefano
On Mon, 2022-09-19 at 14:39 +0200, Stefano Babic wrote:
On 18.09.22 22:41, sba...@denx.de wrote:
From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Applied to u-boot-imx, master, thanks !
Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as
I cannot then test if it is ok. These two patches are not in my PR, I
can pick them up if you repost them.
Sure.
Sorry, I missed this email as you missed CCing anybody else (e.g. like my work
email).
Sorry, you're right.
Plus you probably missed this:
https://patchwork.ozlabs.org/project/uboot/cover/20220822130604.843081-1-mar...@ziswiler.com/#2953792
Anyway, I will send an additional series including Patch 4/5, Patch 5/5 and
fixing v2 vs. v1 (and more).
Thanks !
Regards,
Stefano
Thanks!
Best regards,
Stefano Babic
Cheers
Marcel
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
