cpu.h should be better place to hold the structure definiton.
Our intend is to make <soc>.h as a place only hold register base
address.
Signed-off-by: Lei Wen <lei...@marvell.com>
---
arch/arm/include/asm/arch-armada100/armada100.h | 57 -----------------------
arch/arm/include/asm/arch-armada100/cpu.h | 57 +++++++++++++++++++++++
2 files changed, 57 insertions(+), 57 deletions(-)
diff --git a/arch/arm/include/asm/arch-armada100/armada100.h
b/arch/arm/include/asm/arch-armada100/armada100.h
index d5d125a..5b709ba 100644
--- a/arch/arm/include/asm/arch-armada100/armada100.h
+++ b/arch/arm/include/asm/arch-armada100/armada100.h
@@ -60,62 +60,5 @@
#define ARMD1_APMU_BASE 0xD4282800
#define ARMD1_CPU_BASE 0xD4282C00
-/*
- * Main Power Management (MPMU) Registers
- * Refer Datasheet Appendix A.8
- */
-struct armd1mpmu_registers {
- u8 pad0[0x08 - 0x00];
- u32 fccr; /*0x0008*/
- u32 pocr; /*0x000c*/
- u32 posr; /*0x0010*/
- u32 succr; /*0x0014*/
- u8 pad1[0x030 - 0x014 - 4];
- u32 gpcr; /*0x0030*/
- u8 pad2[0x200 - 0x030 - 4];
- u32 wdtpcr; /*0x0200*/
- u8 pad3[0x1000 - 0x200 - 4];
- u32 apcr; /*0x1000*/
- u32 apsr; /*0x1004*/
- u8 pad4[0x1020 - 0x1004 - 4];
- u32 aprr; /*0x1020*/
- u32 acgr; /*0x1024*/
- u32 arsr; /*0x1028*/
-};
-
-/*
- * APB1 Clock Reset/Control Registers
- * Refer Datasheet Appendix A.10
- */
-struct armd1apb1_registers {
- u32 uart1; /*0x000*/
- u32 uart2; /*0x004*/
- u32 gpio; /*0x008*/
- u32 pwm1; /*0x00c*/
- u32 pwm2; /*0x010*/
- u32 pwm3; /*0x014*/
- u32 pwm4; /*0x018*/
- u8 pad0[0x028 - 0x018 - 4];
- u32 rtc; /*0x028*/
- u32 twsi0; /*0x02c*/
- u32 kpc; /*0x030*/
- u32 timers; /*0x034*/
- u8 pad1[0x03c - 0x034 - 4];
- u32 aib; /*0x03c*/
- u32 sw_jtag; /*0x040*/
- u32 timer1; /*0x044*/
- u32 onewire; /*0x048*/
- u8 pad2[0x050 - 0x048 - 4];
- u32 asfar; /*0x050 AIB Secure First Access Reg*/
- u32 assar; /*0x054 AIB Secure Second Access Reg*/
- u8 pad3[0x06c - 0x054 - 4];
- u32 twsi1; /*0x06c*/
- u32 uart3; /*0x070*/
- u8 pad4[0x07c - 0x070 - 4];
- u32 timer2; /*0x07C*/
- u8 pad5[0x084 - 0x07c - 4];
- u32 ac97; /*0x084*/
-};
-
#endif /* CONFIG_ARMADA100 */
#endif /* _ASM_ARCH_ARMADA100_H */
diff --git a/arch/arm/include/asm/arch-armada100/cpu.h
b/arch/arm/include/asm/arch-armada100/cpu.h
index 0518a6a..b07ba91 100644
--- a/arch/arm/include/asm/arch-armada100/cpu.h
+++ b/arch/arm/include/asm/arch-armada100/cpu.h
@@ -50,4 +50,61 @@ struct armd1cpu_registers {
u32 armd1_sdram_base(int);
u32 armd1_sdram_size(int);
+/*
+ * Main Power Management (MPMU) Registers
+ * Refer Datasheet Appendix A.8
+ */
+struct armd1mpmu_registers {
+ u8 pad0[0x08 - 0x00];
+ u32 fccr; /*0x0008*/
+ u32 pocr; /*0x000c*/
+ u32 posr; /*0x0010*/
+ u32 succr; /*0x0014*/
+ u8 pad1[0x030 - 0x014 - 4];
+ u32 gpcr; /*0x0030*/
+ u8 pad2[0x200 - 0x030 - 4];
+ u32 wdtpcr; /*0x0200*/
+ u8 pad3[0x1000 - 0x200 - 4];
+ u32 apcr; /*0x1000*/
+ u32 apsr; /*0x1004*/
+ u8 pad4[0x1020 - 0x1004 - 4];
+ u32 aprr; /*0x1020*/
+ u32 acgr; /*0x1024*/
+ u32 arsr; /*0x1028*/
+};
+
+/*
+ * APB1 Clock Reset/Control Registers
+ * Refer Datasheet Appendix A.10
+ */
+struct armd1apb1_registers {
+ u32 uart1; /*0x000*/
+ u32 uart2; /*0x004*/
+ u32 gpio; /*0x008*/
+ u32 pwm1; /*0x00c*/
+ u32 pwm2; /*0x010*/
+ u32 pwm3; /*0x014*/
+ u32 pwm4; /*0x018*/
+ u8 pad0[0x028 - 0x018 - 4];
+ u32 rtc; /*0x028*/
+ u32 twsi0; /*0x02c*/
+ u32 kpc; /*0x030*/
+ u32 timers; /*0x034*/
+ u8 pad1[0x03c - 0x034 - 4];
+ u32 aib; /*0x03c*/
+ u32 sw_jtag; /*0x040*/
+ u32 timer1; /*0x044*/
+ u32 onewire; /*0x048*/
+ u8 pad2[0x050 - 0x048 - 4];
+ u32 asfar; /*0x050 AIB Secure First Access Reg*/
+ u32 assar; /*0x054 AIB Secure Second Access Reg*/
+ u8 pad3[0x06c - 0x054 - 4];
+ u32 twsi1; /*0x06c*/
+ u32 uart3; /*0x070*/
+ u8 pad4[0x07c - 0x070 - 4];
+ u32 timer2; /*0x07C*/
+ u8 pad5[0x084 - 0x07c - 4];
+ u32 ac97; /*0x084*/
+};
+
#endif /* _ARMADA100CPU_H */
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
