FSL_IFC should only be selected when booting from NAND flash (or when NAND_FSL_IFC is enabled). The existing logic does this correctly when QSPI is also enabled, but not when just booting from SD.
Signed-off-by: Sean Anderson <sean.ander...@seco.com> --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 80a1642447d..10eef84f8d9 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -62,7 +62,7 @@ config ARCH_LS1043A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT - select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI || !SD_BOOT) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 @@ -98,7 +98,7 @@ config ARCH_LS1043A config ARCH_LS1046A bool select ARMV8_SET_SMPEN - select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI && !SD_BOOT) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 -- 2.35.1.1320.gc452695387.dirty