Hi Adam,
On Wed, Oct 12, 2022 at 06:42:22AM -0500, Adam Ford wrote:
[snip]
> On my board the GPMC runs more than just NAND. I am hoping to get the
> GPMC driver working in U-Boot first then in SPL (assuming it fits). I
> have LTO enabled on my DM3730, so I am hoping it might help make some
> room. I am hoping that once the NAND is working that the GPMC driver
> can be used in U-Boot to handle the configuration of the bus for
> handling Ethernet, so some of the quirks and manual board file
> configuration can be removed.
Any estimate on that? I moved IGEP to use DM for ethernet, but for reasons
you mentioned quirk in DT is still there. Reposting that patch would
currently add one more quirk into codebase, so I'd better avoid that.
Thank you,
L.
