Hi Johan, thanks for this Patch. You were faster with the patch.
I hope the size reduction is enough to make it buildable with Kevers patch. Am 18.10.22 um 13:25 schrieb Johan Jonker: > The phycore_rk3288 board has a SPL size problem, > so remove phycore_init() function to stay within the limits. > > Signed-off-by: Johan Jonker <jbx6...@gmail.com> Reviewed-by: Wadim Egorov <w.ego...@phytec.de> > --- > arch/arm/mach-rockchip/rk3288/Kconfig | 1 - > board/phytec/phycore_rk3288/phycore-rk3288.c | 46 -------------------- > 2 files changed, 47 deletions(-) > > diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig > b/arch/arm/mach-rockchip/rk3288/Kconfig > index e8c57843..1be2b585 100644 > --- a/arch/arm/mach-rockchip/rk3288/Kconfig > +++ b/arch/arm/mach-rockchip/rk3288/Kconfig > @@ -89,7 +89,6 @@ config TARGET_MIQI_RK3288 > config TARGET_PHYCORE_RK3288 > bool "phyCORE-RK3288" > select BOARD_LATE_INIT > - select SPL_BOARD_INIT if SPL > help > Add basic support for the PCM-947 carrier board, a RK3288 based > development board made by PHYTEC. This board works in a combination > diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c > b/board/phytec/phycore_rk3288/phycore-rk3288.c > index 17b987f6..3f49f39e 100644 > --- a/board/phytec/phycore_rk3288/phycore-rk3288.c > +++ b/board/phytec/phycore_rk3288/phycore-rk3288.c > @@ -19,8 +19,6 @@ > #include <netdev.h> > #include <linux/bitops.h> > #include "som.h" > -#include <power/regulator.h> > -#include <power/rk8xx_pmic.h> > > static int valid_rk3288_som(struct rk3288_som *som) > { > @@ -77,47 +75,3 @@ int rk3288_board_late_init(void) > > return 0; > } > - > -#ifdef CONFIG_SPL_BUILD > -#if !defined(CONFIG_SPL_OF_PLATDATA) > -static int phycore_init(void) > -{ > - struct udevice *pmic; > - int ret; > - > - ret = uclass_first_device_err(UCLASS_PMIC, &pmic); > - if (ret) > - return ret; > - > -#if defined(CONFIG_SPL_POWER) > - /* Increase USB input current to 2A */ > - ret = rk818_spl_configure_usb_input_current(pmic, 2000); > - if (ret) > - return ret; > - > - /* Close charger when USB lower then 3.26V */ > - ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000); > - if (ret) > - return ret; > -#endif > - > - return 0; > -} > -#endif > - > -void spl_board_init(void) > -{ > -#if !defined(CONFIG_SPL_OF_PLATDATA) > - int ret; > - > - if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { > - ret = phycore_init(); > - if (ret) { > - debug("Failed to set up phycore power settings: %d\n", > - ret); > - return; > - } > - } > -#endif > -} > -#endif