Hi Andre,
On 18/10/22 16:01, Andre Przywara wrote:
On Fri, 14 Oct 2022 01:04:18 -0400
Jesse Taube <mr.bossman...@gmail.com> wrote:
Hi Jesse, Giulio,
thanks for having a look and for the testing!
You're welcome:
Tested-by: Giulio Benetti <giulio.bene...@benettiengineering.com>
Best regards
--
Giulio Benetti
CEO/CTO@Benetti Engineering sas
On 10/13/22 05:53, Andre Przywara wrote:
On 13/10/2022 09:33, Clément Péron wrote:
Hi Clément,
On Wed, 12 Oct 2022 at 18:35, Andre Przywara <andre.przyw...@arm.com> wrote:
The CherryPi F1C200s board is a small development board, featuring the
F1C200s with 64MB of co-packaged DRAM. It comes with two USB-C sockets,
of which one is connected to a USB-UART chip, that provides easy access
to UART1.
A similar board is trying to been upstreamed by Icenowy:
see : https://lore.kernel.org/lkml/20221012055602.1544944-11-...@icenowy.me/
[PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1
Maybe we should take into account the remarks that Krzysztof Kozlowski
made to follow the same device-tree rules on U-boot.
Yeah, thanks for the heads up, I saw that. I just wanted to post this to
demonstrate what needs to be done. I will be sending a Linux DT patch
anyway, since DTs need to go via Linux anyway.
Thanks,
Andre
Regards,
Clement
Beside the usual micro-SD card slot, the board comes with a SPI NAND
flash chip, which is not yet supported.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
.../dts/suniv-f1c100s-cherrypi-f1c200s.dts | 45 +++++++++++++++++++
configs/cherrypi_f1c200s_defconfig | 11 +++++
2 files changed, 56 insertions(+)
create mode 100644 arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
create mode 100644 configs/cherrypi_f1c200s_defconfig
diff --git a/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
b/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
new file mode 100644
index 00000000000..f0ebcb6d893
--- /dev/null
+++ b/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2022 Arm Ltd.
+ * based on another DT, which is:
+ * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
Her email changed IDK if it is proper to change here.
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+/ {
+ model = "Cherry Pi F1C200s";
+ compatible = "lctech,cherrypi-f1c200s", "allwinner,suniv-f1c100s";
+
+ aliases {
+ mmc0 = &mmc0;
+ serial0 = &uart1;
+ spi0 = &spi0;
no need for spi.
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ status = "okay";
+ vmmc-supply = <®_vcc3v3>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pa_pins>;
+ status = "okay";
+};
diff --git a/configs/cherrypi_f1c200s_defconfig
b/configs/cherrypi_f1c200s_defconfig
new file mode 100644
index 00000000000..306d363f485
--- /dev/null
+++ b/configs/cherrypi_f1c200s_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-cherrypi-f1c200s"
+CONFIG_SPL=y
+CONFIG_MACH_SUNIV=y
+CONFIG_DRAM_CLK=156
+CONFIG_DRAM_ZQ=0
You need
+CONFIG_SPL_STACK=0x8000
I posted "[PATCH 1/2] sunxi: Kconfig: use SoC-wide values for some symbols"
(https://lore.kernel.org/u-boot/20220913234335.24902-2-andre.przyw...@arm.com/)
that solves that issue.
That patch is applied before this series in the tree, so no change should
be needed.
Thanks for the report!
Cheers,
Andre
I will test this on both 100s and 200s.
Thanks,
Jesse Taube
+CONFIG_SUNXI_MINIMUM_DRAM_MB=64
+# CONFIG_VIDEO_SUNXI is not set
+CONFIG_CONS_INDEX=2
--
2.25.1
