Use the correct SPL_TPL_ variable so that these features can be enabled in
TPL and VPL as needed.

Disable it by default in TPL to avoid any code-size increase. No boards
are actually using it since the Makefile rules don't allow including
drivers/block/ with TPL_DM enabled. It can be manually enabled as needed.

Signed-off-by: Simon Glass <s...@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
---

(no changes since v2)

Changes in v2:
- Disable TPL_BLK by default

 drivers/Makefile       | 2 +-
 drivers/block/Kconfig  | 1 -
 drivers/block/Makefile | 2 +-
 drivers/mmc/Makefile   | 2 +-
 4 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 9d9f69a3c9a..a1700c819de 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
 obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
 obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
@@ -60,7 +61,6 @@ obj-$(CONFIG_SPL_USB_HOST) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA) += ata/ scsi/
 obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
-obj-$(CONFIG_SPL_BLK) += block/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
 endif
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 707e2bcd238..e95da48bdc0 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -37,7 +37,6 @@ config SPL_BLK
 config TPL_BLK
        bool "Support block devices in TPL"
        depends on TPL_DM && BLK
-       default y
        help
          Enable support for block devices, such as SCSI, MMC and USB
          flash sticks. These provide a block-level interface which permits
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index f48d3e12140..19d9317c825 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -3,7 +3,7 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, w...@denx.de.
 
-obj-$(CONFIG_$(SPL_)BLK) += blk-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)BLK) += blk-uclass.o
 
 ifndef CONFIG_$(SPL_)BLK
 obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 5d5104bbf1d..3a664c2ebbb 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -10,7 +10,7 @@ ifdef CONFIG_$(SPL_TPL_)DM_MMC
 obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
 endif
 
-obj-$(CONFIG_$(SPL_)MMC_WRITE) += mmc_write.o
+obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
 obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
 obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
 
-- 
2.38.0.135.g90850a2211-goog

Reply via email to