> Enable DM USB, DM PHY and USB gadget support in imx8mm-mx8menlo SPL > to let the board continue SDP loading of second stage after the first > stage was loaded by BootROM SDP implementation. It is not possible to > jump back into BootROM v1 and let the BootROM implementation continue > the SDP loading, all this has to be performed by the U-Boot CI HDRC > controller driver and SDP protocol implementation, both of which fit > into the SPL just barely. > With this patch, it is possible to start both U-Boot SPL and U-Boot > using e.g. uuu on this board as follows: > $ uuu -brun spl flash.bin > Signed-off-by: Marek Vasut <ma...@denx.de> > Reviewed-by: Fabio Estevam <feste...@denx.de> > Reviewed-by: Peng Fan <peng....@nxp.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================