On Mon, Oct 24, 2022 at 6:29 PM Peng Fan <peng....@oss.nxp.com> wrote:
>
>
>
> On 10/25/2022 4:47 AM, Tim Harvey wrote:
> > On Mon, Oct 24, 2022 at 1:26 PM Adam Ford <aford...@gmail.com> wrote:
> >>
> >> On Mon, Oct 24, 2022 at 2:57 PM Tim Harvey <thar...@gateworks.com> wrote:
> >>>
> >>> On Sat, Oct 22, 2022 at 7:28 AM Adam Ford <aford...@gmail.com> wrote:
> >>>>
> >>>> There are a few functions which are not essential for use in
> >>>> SPL, but they take up enough space to make other preferred
> >>>> features not fit. Remove the extras.
> >>>>
> >>>> Signed-off-by: Adam Ford <aford...@gmail.com>
> >>>>
> >>>> diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
> >>>> index a93cc93878..b0e9d918da 100644
> >>>> --- a/board/beacon/imx8mm/spl.c
> >>>> +++ b/board/beacon/imx8mm/spl.c
> >>>> @@ -44,11 +44,6 @@ static void spl_dram_init(void)
> >>>> ddr_init(&dram_timing);
> >>>> }
> >>>>
> >>>> -void spl_board_init(void)
> >>>> -{
> >>>> - debug("Normal Boot\n");
> >>>> -}
> >>>> -
> >>>> #ifdef CONFIG_SPL_LOAD_FIT
> >>>> int board_fit_config_name_match(const char *name)
> >>>> {
> >>>> diff --git a/configs/imx8mm_beacon_defconfig
> >>>> b/configs/imx8mm_beacon_defconfig
> >>>> index e37ce01c19..f6a1012d8a 100644
> >>>> --- a/configs/imx8mm_beacon_defconfig
> >>>> +++ b/configs/imx8mm_beacon_defconfig
> >>>> @@ -29,7 +29,6 @@ CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
> >>>> CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> >>>> CONFIG_SPL_BSS_START_ADDR=0x910000
> >>>> CONFIG_SPL_BSS_MAX_SIZE=0x2000
> >>>> -CONFIG_SPL_BOARD_INIT=y
> >>>> # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> >>>> CONFIG_SPL_STACK=0x920000
> >>>> CONFIG_SYS_SPL_MALLOC=y
> >>>> @@ -88,12 +87,9 @@ CONFIG_DM_PCA953X=y
> >>>> CONFIG_DM_I2C=y
> >>>> CONFIG_SUPPORT_EMMC_BOOT=y
> >>>> CONFIG_MMC_IO_VOLTAGE=y
> >>>> -CONFIG_SPL_MMC_IO_VOLTAGE=y
> >>>> CONFIG_MMC_UHS_SUPPORT=y
> >>>> -CONFIG_SPL_MMC_UHS_SUPPORT=y
> >>>> CONFIG_MMC_HS400_ES_SUPPORT=y
> >>>> CONFIG_MMC_HS400_SUPPORT=y
> >>>> -CONFIG_SPL_MMC_HS400_SUPPORT=y
> >>>> CONFIG_FSL_USDHC=y
> >>>> CONFIG_MTD=y
> >>>> CONFIG_DM_MTD=y
> >>>> @@ -113,14 +109,12 @@ CONFIG_PINCTRL_IMX8M=y
> >>>> CONFIG_POWER_DOMAIN=y
> >>>> CONFIG_IMX8M_POWER_DOMAIN=y
> >>>> CONFIG_DM_PMIC=y
> >>>> +# CONFIG_SPL_PMIC_CHILDREN is not set
> >>>> CONFIG_DM_PMIC_BD71837=y
> >>>> CONFIG_SPL_DM_PMIC_BD71837=y
> >>>> CONFIG_DM_REGULATOR=y
> >>>> -CONFIG_SPL_DM_REGULATOR=y
> >>>> CONFIG_DM_REGULATOR_BD71837=y
> >>>> -CONFIG_SPL_DM_REGULATOR_BD71837=y
> >>>> CONFIG_DM_REGULATOR_FIXED=y
> >>>> -CONFIG_SPL_DM_REGULATOR_FIXED=y
> >>>> CONFIG_DM_REGULATOR_GPIO=y
> >>>> CONFIG_DM_SERIAL=y
> >>>> CONFIG_MXC_UART=y
> >>>> --
> >>>> 2.34.1
> >>>>
> >>>
> >>> Adam,
> >>>
> >>> I'm looking at your patches as I'm also trying to strip down the
> >>> imx8mm-venice SPL so that I can fit DM USB support. It seems that
> >>> all/most of the imx8m boards have a spl_board_init() which calls
> >>> arch_misc_init(). I'm curious why your not calling that function?
> >>
> >> As of right now, we're not using the CAAM which is initialized in
> >> arch_misc_init. If/When we do, we'll likely have to pull that in.
> >>
> >
> > ok - makes sense.
> >
> >>>
> >>> Another config that I've found to save a lot of space for imx8m
> >>> without any negative impact I can see is CONFIG_SPL_MMC_TINY=y
> >>
> >> I experimented a bit with that too, but I hadn't fully tested
> >> switching between booting between MMC1 and MMC2, so I wasn't quite
> >> ready to enable it, but I'll spend some more time with it to see how
> >> much more space I can shave off SPL.
> >> Getting rid of the PMIC children in SPL helped me quite a bit.
> >
> > I see. It appears to save about 2K and Fabio's imx8mm clk reduction
> > series that made it in saves another 800 bytes or so.
> >
> > Regardless I'm still oversize for imx8mm-venice by 2K bytes and
> > looking for things to prune. My issue is that I have 4 DRAM configs to
> > support which suck up 3K each I believe.
>
> Why has so many DRAM configs? Use one image to support multiple boards?
>
> Regards,
> Peng.
>
Peng,
Yes, imx8mm_venice_defconfig covers 6 different dtbs and 4 different
DRAM configs (512MiB, 1GiB, 2GiB, 4GiB) which bloats the SPL to the
point that I can't add SDP support... specifically DM USB.
Tim
