In the v2022.10 Icicle reference design, the seg registers have been
changed, resulting in a required change to the memory map.
A small 4MB reservation is made at the end of 32-bit DDR to provide some
memory for the HSS to use, so that it can cache its payload between
reboots of a specific context.

Co-developed-by: Conor Dooley <conor.doo...@microchip.com>
Signed-off-by: Conor Dooley <conor.doo...@microchip.com>
Signed-off-by: Padmarao Begari <padmarao.beg...@microchip.com>
Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
---
 arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 75 +++++---------------
 1 file changed, 17 insertions(+), 58 deletions(-)

diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts 
b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
index 287ef3d23b..48fc2bf06a 100644
--- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (C) 2021 Microchip Technology Inc.
+ * Copyright (C) 2021-2022 Microchip Technology Inc.
  * Padmarao Begari <padmarao.beg...@microchip.com>
  */
 
@@ -13,7 +13,8 @@
 
 / {
        model = "Microchip PolarFire-SoC Icicle Kit";
-       compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
+       compatible = "microchip,mpfs-icicle-reference-rtlv2210",
+                    "microchip,mpfs-icicle-kit", "microchip,mpfs";
 
        aliases {
                serial1 = &uart1;
@@ -28,70 +29,28 @@
                timebase-frequency = <RTCCLK_FREQ>;
        };
 
-       reserved-memory {
-               ranges;
-               #size-cells = <2>;
-               #address-cells = <2>;
-
-               fabricbuf0: fabricbuf@0 {
-                       compatible = "shared-dma-pool";
-                       reg = <0x0 0xae000000 0x0 0x2000000>;
-                       label = "fabricbuf0-ddr-c";
-               };
-
-               fabricbuf1: fabricbuf@1 {
-                       compatible = "shared-dma-pool";
-                       reg = <0x0 0xc0000000 0x0 0x8000000>;
-                       label = "fabricbuf1-ddr-nc";
-               };
-
-               fabricbuf2: fabricbuf@2 {
-                       compatible = "shared-dma-pool";
-                       reg = <0x0 0xd8000000 0x0 0x8000000>;
-                       label = "fabricbuf2-ddr-nc-wcb";
-               };
-       };
-
-       udmabuf0 {
-               compatible = "ikwzm,u-dma-buf";
-               device-name = "udmabuf-ddr-c0";
-               minor-number = <0>;
-               size = <0x0 0x2000000>;
-               memory-region = <&fabricbuf0>;
-               sync-mode = <3>;
-       };
-
-       udmabuf1 {
-               compatible = "ikwzm,u-dma-buf";
-               device-name = "udmabuf-ddr-nc0";
-               minor-number = <1>;
-               size = <0x0 0x8000000>;
-               memory-region = <&fabricbuf1>;
-               sync-mode = <3>;
-       };
-
-       udmabuf2 {
-               compatible = "ikwzm,u-dma-buf";
-               device-name = "udmabuf-ddr-nc-wcb0";
-               minor-number = <2>;
-               size = <0x0 0x8000000>;
-               memory-region = <&fabricbuf2>;
-               sync-mode = <3>;
-       };
-
        ddrc_cache_lo: memory@80000000 {
                device_type = "memory";
-               reg = <0x0 0x80000000 0x0 0x2e000000>;
-               clocks = <&clkcfg CLK_DDRC>;
+               reg = <0x0 0x80000000 0x0 0x40000000>;
                status = "okay";
        };
 
-       ddrc_cache_hi: memory@1000000000 {
+       ddrc_cache_hi: memory@1040000000 {
                device_type = "memory";
-               reg = <0x10 0x0 0x0 0x40000000>;
-               clocks = <&clkcfg CLK_DDRC>;
+               reg = <0x10 0x40000000 0x0 0x40000000>;
                status = "okay";
        };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               hss_payload: region@BFC00000 {
+                       reg = <0x0 0xBFC00000 0x0 0x400000>;
+                       no-map;
+               };
+       };
 };
 
 &uart1 {
-- 
2.25.1

Reply via email to