[PATCH 05/11] board: ti: j721s2: Enable support for reading EEPROM at next alternate address

[Sinthu Raja]

From: Sinthu Raja <sinthu.r...@ti.com>

J721S2 EVM has EEPROM populated at 0x50. AM68 SK has EEPROM populated at
next address 0x51 in order to be compatible with RPi. So start looking
for TI specific EEPROM at 0x50, if not found look for EEPROM at 0x51.

Signed-off-by: Sinthu Raja <sinthu.r...@ti.com>
---
 board/ti/j721s2/evm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index e3c75b35b6..8ada924e3f 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -109,9 +109,15 @@ int do_board_detect(void)
 
        ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
                                         CONFIG_EEPROM_CHIP_ADDRESS);
-       if (ret)
-               pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
-                      CONFIG_EEPROM_CHIP_ADDRESS, ret);
+       if (ret) {
+               printf("EEPROM not available at 0x%02x, trying to read at 
0x%02x\n",
+                      CONFIG_EEPROM_CHIP_ADDRESS, CONFIG_EEPROM_CHIP_ADDRESS + 
1);
+               ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
+                                                CONFIG_EEPROM_CHIP_ADDRESS + 
1);
+               if (ret)
+                       pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
+                               CONFIG_EEPROM_CHIP_ADDRESS + 1, ret);
+       }
 
        return ret;
 }
-- 
2.36.1