This was already supported by every machine type. It is unlikely that
any new SoC support will be added without SPL support.
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
arch/arm/mach-sunxi/Kconfig | 14 --------------
board/sunxi/Kconfig | 2 ++
2 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index a03e700a0b..73097e5a40 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -133,7 +133,6 @@ config SUN50I_GEN_H6
select FIT
select SPL_LOAD_FIT
select MMC_SUNXI_HAS_NEW_MODE
- select SUPPORT_SPL
---help---
Select this for sunxi SoCs which have H6 like peripherals, clocks
and memory map.
@@ -167,7 +166,6 @@ config MACH_SUNXI_H3_H5
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
# TODO: try out A80's 8GiB DRAM space
config SUNXI_DRAM_MAX_SIZE
@@ -184,7 +182,6 @@ config MACH_SUNIV
bool "suniv (Allwinner F1C100s/F1C200s/F1C600/R6)"
select CPU_ARM926EJS
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
select SKIP_LOWLEVEL_INIT_ONLY
select SPL_SKIP_LOWLEVEL_INIT_ONLY
@@ -194,7 +191,6 @@ config MACH_SUN4I
select PHY_SUN4I_USB
select DRAM_SUN4I
select SUNXI_GEN_SUN4I
- select SUPPORT_SPL
imply SPL_SYS_I2C_LEGACY
imply SYS_I2C_LEGACY
@@ -204,7 +200,6 @@ config MACH_SUN5I
select DRAM_SUN4I
select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
- select SUPPORT_SPL
imply SPL_SYS_I2C_LEGACY
imply SYS_I2C_LEGACY
@@ -220,7 +215,6 @@ config MACH_SUN6I
select SPL_I2C
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
select SYS_I2C_SUN6I_P2WI
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -234,7 +228,6 @@ config MACH_SUN7I
select DRAM_SUN4I
select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
- select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
imply SPL_SYS_I2C_LEGACY
imply SYS_I2C_LEGACY
@@ -249,7 +242,6 @@ config MACH_SUN8I_A23
select PHY_SUN4I_USB
select SPL_I2C
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
select SYS_I2C_SUN8I_RSB
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -263,7 +255,6 @@ config MACH_SUN8I_A33
select PHY_SUN4I_USB
select SPL_I2C
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
select SYS_I2C_SUN8I_RSB
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -276,7 +267,6 @@ config MACH_SUN8I_A83T
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
select MMC_SUNXI_HAS_MODE_SWITCH
- select SUPPORT_SPL
select SYS_I2C_SUN8I_RSB
config MACH_SUN8I_H3
@@ -296,7 +286,6 @@ config MACH_SUN8I_R40
select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
- select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
select PHY_SUN4I_USB
@@ -311,7 +300,6 @@ config MACH_SUN8I_V3S
select SUNXI_GEN_SUN6I
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_16BIT
- select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN9I
@@ -322,7 +310,6 @@ config MACH_SUN9I
select SPL_I2C
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
@@ -332,7 +319,6 @@ config MACH_SUN50I
select SUNXI_DE2
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
- select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
select FIT
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 1d0700fe5f..056ccb6f74 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -18,6 +18,7 @@ config BOARD_SUNXI
select SPL_SEPARATE_BSS if SPL
select SUNXI_GPIO if GPIO
select SYS_NS16550 if SERIAL
+ select SUPPORT_SPL
select SYS_RELOC_GD_ENV_ADDR
select USB if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
@@ -31,6 +32,7 @@ config BOARD_SUNXI
imply FIT
imply OF_LIBFDT_OVERLAY
imply PRE_CONSOLE_BUFFER
+ imply SPL
imply SPL_GPIO
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
--
2.37.3
