On 01/09/2011 03:40 PM, Jason Liu wrote: > Hi, Stefano, > Hi Jason,
> Have you set the page_size correctly with the following register? Let's see... > > 49.4.3.7 Reset Control and Sourse Register - RCSR: > > NFC_4K > This bit is used to config the NandFlash page size. It is defined by > PAGE_SIZE while boot up, and it can be > configured by software after boot up. > 0 not 4k page > 1 4k page > 8 This seems ok. > NFC_FMS > This bit is used to config the NandFlash page size.It is defined by > PAGE_SIZE while boot up,and it can be > configured by software after boot up. > 0 not 2k page > 1 2k page That's it ! This was wrong on my board. I set the NFC_FMS bit and the whole page is now read correctly. Many thanks, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
