On 01/10/2011 01:58 PM, Tiago Maluta wrote: > Hi, > Hi Tiago,
> I'm facing ECC errors when flashing u-boot on NAND on MX51EVK-based > board. U-Boot "nand write" command doesn't fill out-of-band (OOB) > bytes correctly. The mxc_nand driver in u-boot mainline does not support version 3 of the internal NFC controller we find on the i.MX51 processor. You should have patched the driver to adapt it for the i.MX51, or you are using other sources. If you have patched the actual driver, please post your patch for review. > my logs: > http://farm6.static.flickr.com/5130/5320148028_7da19d3cf2_o.png > http://www.coding.com.br/wp-content/uploads/2011/01/nand-dump-fail.txt > http://www.coding.com.br/wp-content/uploads/2011/01/nand-dump-ok.txt It seems to me you are not using u-boot mainline... Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
