Hi Bryan, > This series will introduce basic support (SD and UART) support for Texas > Instruments AM62Ax SK EVM. > > The am62ax shares many of the same features as the am62x however it uses > a new 32bit controller and therefore depends on the patch I sent last > week updating the macros used by the k3-ddrss ram driver[0]. > > Here is some proof of life & more documentation if you're interested :) > > Bootlog:https://paste.sr.ht/~bryanb/e0a418ba7dd452749d2dd1efb5e91b2875a01708 > Technical Reference Manual:https://www.ti.com/lit/zip/spruj16 > Schematics:https://www.ti.com/lit/zip/sprr459
Does this board need a readme for how to build the firmware, these days there generally needs to be ATF and probably a slew of other firmwares linked into a FIT image or similar to build the entire firmware bundle, a readme would likely be a useful addition for people getting started if there's not a generic TI 64 bit build doc, and if there is that likely needs an update to include this SoC/board. I didn't see anything that looked like that in the file list below. Peter > Thanks for reviewing! > ~Bryan > > [0] https://lore.kernel.org/u-boot/20221024215328.22373-1...@ti.com/ > > Bryan Brattlof (8): > arm: dts: introduce am62a7 dtbs from linux kernel > arm: dts: introduce am62a7 u-boot dtbs > ram: k3-ddrss: add am62a controller support > soc: ti: k3-socinfo: add am62a SoC entry > arm: mach-k3: introduce basic files to support the am62a > arm: mach-k3: am62a: introduce auto-generated SoC data > board: ti: introduce the basic files needed to support the am62a > configs: introduce configs for the am62a > > arch/arm/dts/Makefile | 3 + > arch/arm/dts/k3-am62a-ddr-1866mhz-32bit.dtsi | 2798 ++++++++++++++++ > arch/arm/dts/k3-am62a-ddr.dtsi | 2814 +++++++++++++++++ > arch/arm/dts/k3-am62a-main.dtsi | 298 ++ > arch/arm/dts/k3-am62a-mcu.dtsi | 39 + > arch/arm/dts/k3-am62a-wakeup.dtsi | 54 + > arch/arm/dts/k3-am62a.dtsi | 122 + > arch/arm/dts/k3-am62a7-r5-sk.dts | 143 + > arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 140 + > arch/arm/dts/k3-am62a7-sk.dts | 223 ++ > arch/arm/dts/k3-am62a7.dtsi | 103 + > arch/arm/mach-k3/Kconfig | 14 +- > arch/arm/mach-k3/Makefile | 2 + > arch/arm/mach-k3/am62a7_init.c | 250 ++ > arch/arm/mach-k3/am62ax/Makefile | 6 + > arch/arm/mach-k3/am62ax/clk-data.c | 317 ++ > arch/arm/mach-k3/am62ax/dev-data.c | 73 + > arch/arm/mach-k3/arm64-mmu.c | 6 +- > .../arm/mach-k3/include/mach/am62a_hardware.h | 74 + > arch/arm/mach-k3/include/mach/am62a_spl.h | 49 + > arch/arm/mach-k3/include/mach/hardware.h | 4 + > arch/arm/mach-k3/include/mach/spl.h | 4 + > board/ti/am62ax/Kconfig | 52 + > board/ti/am62ax/MAINTAINERS | 9 + > board/ti/am62ax/Makefile | 7 + > board/ti/am62ax/evm.c | 31 + > configs/am62ax_evm_a53_defconfig | 79 + > configs/am62ax_evm_r5_defconfig | 106 + > drivers/clk/ti/clk-k3.c | 6 + > drivers/firmware/ti_sci_static_data.h | 4 +- > drivers/power/domain/ti-power-domain.c | 6 + > drivers/ram/Kconfig | 1 + > drivers/ram/k3-ddrss/k3-ddrss.c | 1 + > drivers/soc/soc_ti_k3.c | 4 + > include/configs/am62ax_evm.h | 68 + > include/dt-bindings/pinctrl/k3.h | 3 + > include/k3-clk.h | 1 + > include/k3-dev.h | 1 + > 38 files changed, 7906 insertions(+), 9 deletions(-) > create mode 100644 arch/arm/dts/k3-am62a-ddr-1866mhz-32bit.dtsi > create mode 100644 arch/arm/dts/k3-am62a-ddr.dtsi > create mode 100644 arch/arm/dts/k3-am62a-main.dtsi > create mode 100644 arch/arm/dts/k3-am62a-mcu.dtsi > create mode 100644 arch/arm/dts/k3-am62a-wakeup.dtsi > create mode 100644 arch/arm/dts/k3-am62a.dtsi > create mode 100644 arch/arm/dts/k3-am62a7-r5-sk.dts > create mode 100644 arch/arm/dts/k3-am62a7-sk-u-boot.dtsi > create mode 100644 arch/arm/dts/k3-am62a7-sk.dts > create mode 100644 arch/arm/dts/k3-am62a7.dtsi > create mode 100644 arch/arm/mach-k3/am62a7_init.c > create mode 100644 arch/arm/mach-k3/am62ax/Makefile > create mode 100644 arch/arm/mach-k3/am62ax/clk-data.c > create mode 100644 arch/arm/mach-k3/am62ax/dev-data.c > create mode 100644 arch/arm/mach-k3/include/mach/am62a_hardware.h > create mode 100644 arch/arm/mach-k3/include/mach/am62a_spl.h > create mode 100644 board/ti/am62ax/Kconfig > create mode 100644 board/ti/am62ax/MAINTAINERS > create mode 100644 board/ti/am62ax/Makefile > create mode 100644 board/ti/am62ax/evm.c > create mode 100644 configs/am62ax_evm_a53_defconfig > create mode 100644 configs/am62ax_evm_r5_defconfig > create mode 100644 include/configs/am62ax_evm.h > > -- > 2.38.1 >