On 02/11/22, Fabio Estevam wrote: > On Wed, Nov 2, 2022 at 12:59 PM Oliver Graute > <oliver.gra...@kococonnector.com> wrote: > > Please add a commit log.
ok > > > Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com> > > > +&binman { > > + > > + itb { > > + filename = "u-boot.itb"; > > + > > + fit { > > + description = "Configuration to load ATF before > > U-Boot"; > > + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; > > Can't all boards use the common the binman nodes from > arch/arm/dts/imx8qm-u-boot.dtsi instead? I'am about to try that but I run into the following error: binman: Filename 'spl/u-boot-spl.bin' not found in input path (.,.,./board/toradex/apalis-imx8,arch/arm/dts) (cwd='/home/graute/u-boot-upstream') Makefile:1109: recipe for target 'all' failed make: *** [all] Error 1 The error disappear if I remove binman/u-boot-spl-ddr and binman/spl node in the common file. So some of these boards needs the binman/u-boot-spl-ddr and binman/spl node and others not. What is the proper solution to deal with this difference here? Best regards, Oliver